OWC 64GB (4x16GB) DDR4 2933 ECC Registered RDIMM for PowerEdge C4140
- 64 GB (4 × 16 GB)
- DDR4 2933
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 64 GB DDR4 2933 ECC registered RDIMM validated for the PowerEdge C4140 server
Capacity 64GB
This is a single 64GB DDR4 ECC Registered RDIMM built for the PowerEdge C4140 with CascadeLake CPUs. It suits administrators expanding memory capacity in compatible Dell servers or workstations.
Verify the server uses registered ECC DDR4 and does not mix unbuffered or load-reduced modules. Confirm the platform accepts 2933MHz CL21 2Rx4 288-pin 1.2V DIMMs and that the CPU is a CascadeLake model.
The module plugs into a standard 288-pin DDR4 slot and operates at 1.2V. It replaces Dell part numbers AA579530 AA601615 AB003154 SNPW403YC/64G SNPW403YC/64VXR W403Y and supports backward speeds of 2133MHz 2400MHz 2666MHz.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 2R9D42R464 GB |
| Total capacity | 64 GB |
| Product type | 288-Pin DDR4 ECC RDIMM |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Memory | |
| CAS latency | CL21 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | PowerEdge C4140 (CascadeLake CPU) |
Other versions of this model
The box contains one 64GB DDR4 2933 CL21 2Rx4 288-pin 1.2V ECC Registered RDIMM module. No extra parts or cables are required for installation in a compatible PowerEdge C4140 server.
This single module provides 64GB at 2933MHz CL21. Choose it when you need a registered ECC DIMM that matches the server's DDR4 2933 specification and replaces Dell part numbers AA579530, AA601615, AB003154, SNPW403YC/64G or W403Y.
The module runs at DDR4 2933 (PC4-23400) with CL21 latency at 1.2V. It is backward compatible with 2133MHz, 2400MHz and 2666MHz bus speeds, so it will operate at the highest speed the C4140 platform supports.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?