We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 24-pin ATX extension cable with RGB optical fibre, 9.6 in, 18AWG

Qinghai Electronics

Qinghai Electronics 24-Pin RGB Extension Cable 9.6 in 18AWG

SKU CH-7A0W-DVDY3

A 24-pin ATX extension cable with integrated RGB lighting and 18AWG copper conductors for compatible motherboards

  • Rated speedTest Value
  • Cable length9.6 in (24.4 cm)
  • First connector1x ATX 24pin female
  • Second connector1x ATX 24pin male
  • Connector genderFemale to Male
  • Conductor typeCopper Conductor

Model 24 Pin

Cable Length 9"

  • RGB lighting flows along 9.6 in extension cable
  • 18AWG copper conductors maintain stable 24-pin power delivery
  • Double-layer design with silver reflective base adds 1.5 cm thickness
  • Compatible with 5 V addressable RGB motherboards only
  • Fits E-ATX, ATX and Micro-ATX boards in side-transparent cases

24-Pin RGB Extension Cable 9.6 in

The Qinghai Electronics 24-pin RGB extension cable measures 9.6 inches and uses 18AWG copper conductors with shielding. It connects a 24-pin female ATX connector from the power supply to a 24-pin male ATX connector on the motherboard. Integrated optical fibre creates a neon lighting effect along the cable length.

Builders with 5V addressable RGB headers

This cable suits systems using a motherboard with a 5V 3-pin addressable RGB header for direct synchronization. It will not work with 12V 4-pin RGB headers or external 12V controllers; connecting those will damage the lighting. The 1.5 cm double-layer construction also requires a spacious chassis with a transparent side panel to accommodate the thickness and display the light effect.

5V addressable RGB header required

The single specification that determines compatibility is the motherboard's 5V 3-pin addressable RGB header. Without this exact header, the neon lighting cannot be powered or controlled safely. Buyers must verify their motherboard provides a 5V ARGB connection before purchasing.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $19.99
Pricier than about 61% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHipesen
Product typeExtension Cable
Product colorBlack
Performance
Rated speedTest Value
Ports & slots
First connector1x ATX 24pin female
Second connector1x ATX 24pin male
Connector genderFemale to Male
Size & build
Overall length6 in - 10 in
Cable length9.6 in (24.4 cm)
Cable shieldingYes
Conductor typeCopper Conductor

Other versions of this model

3 more in the same range

Questions about this item

Does my motherboard need a 5 V addressable-RGB header to drive the lighting on this 24-pin extension?

Yes — the cable only works with a 5 V ARGB header; connecting it to any 12 V RGB header or controller will damage the LEDs.

Will the 9.6 in length and 1.5 cm thickness fit cleanly behind an ATX board in a mid-tower case?

The 9.6 in cable and 1.5 cm double-layer profile need a side-transparent chassis with good rear clearance; tight mid-towers may require careful routing.

How can I confirm the neon streamer effect is running correctly after I plug it in?

Power on the system and verify the motherboard ARGB software shows the cable as a 5 V device — you should see multi-color streamer, contrast, gradient and single-color modes cycling across the 24-pin run.

More in Internal PSU & Riser Cables

Similar items