Redpepper 4K HDMI 2.0 Splitter 1x4

Redpepper 4K HDMI 2.0 Splitter 1x4

This splitter takes one HDMI source and duplicates the signal across four displays simultaneously. It supports 4K at 60 Hz and 1080p at 60 Hz, plus 3D, 12-bit Deep Color and HDCP pass-through. Uncompressed LPCM and compressed formats such as DTS Digital and Dolby True HD are also handled. The unit draws up to 15 mA and can operate from the source device or the included power cable.

Mirror one source to four screens

The device replaces a simple point-to-point HDMI cable when the same image must appear on multiple televisions or monitors. It is worth adding when you need to feed a living-room TV, a bedroom display, a capture card and a projector all from a single console, set-top box or media streamer without changing cables. The jump makes sense for installers who want plug-and-play duplication with status LEDs and no software configuration.

Check your source and cables before ordering

Verify that the source device outputs a resolution and refresh rate the splitter can pass, such as 4K at 60 Hz or 1080p at 60 Hz. Confirm that all four display endpoints accept the same mirrored signal and support HDCP if protected content is used. Ensure each HDMI cable run is within the length limits of the HDMI 2.0 specification for the chosen resolution. The splitter needs either a source capable of supplying 15 mA or a free USB port for the supplied power cable.