We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black lavalier microphone with clip, foam windshield and 1.2m Kevlar cable

Rode Lavalier GO Professional Wearable Microphone Black 3.5mm 4.0mm Capsule 1.2m Kevlar Cable

SKU CH-7PH5-9K0ER

A professional wearable microphone with a discreet 4.0 mm omnidirectional capsule, 3.5 mm TRS connector, 1.2 m Kevlar-reinforced cable, 35 dB sensitivity and 67 dB signal-to-noise ratio.

  • Connection3.5 mm Jack
  • Mic sensitivity35 decibels
  • Mic impedance3000 ohm
  • Mic signal-to-noise ratio67 decibels
  • Product colorBlack
  • Key featuresClip
  • Broadcast-grade audio from a 4.0 mm capsule
  • 5 mm TRS plug connects to cameras and wireless transmitters
  • Omnidirectional pattern captures clear sound from any angle
  • Foam pop shield cuts wind noise and plosives
  • 2 m Kevlar-reinforced cable withstands heavy use

Professional wearable microphone for creators

The Rode Lavalier GO is a professional-grade wearable microphone built for filmmaking, broadcast, streaming and video calls. Its omnidirectional polar pattern captures clear audio from every direction and remains forgiving if the clip shifts during fast-paced recording. A 4.0mm capsule keeps the profile ultra-discreet while delivering broadcast-grade sound. The 3.5mm TRS connector provides broad compatibility with cameras, audio interfaces and wireless transmitters.

Sensitivity, noise floor and passive operation

With a sensitivity of 35 decibels and a signal-to-noise ratio of 67 decibels, the microphone produces a clean signal without requiring external power. The 3000 ohm impedance matches standard microphone inputs on a wide range of devices. Because it draws no power and has no active circuitry, the unit adds no electrical noise or heat to the recording chain.

Foam shield, Kevlar cable and mounting clip

A supplied foam pop shield reduces wind noise and vocal plosives such as hard b, t and p sounds. The 1.2m cable is reinforced with Kevlar for durability across repeated shoots. An integrated mounting clip includes built-in cable management for quick rigging and secure placement on talent.

How it compares

Measured against everything we stock in Streaming & USB Microphones, at today’s prices. Recalculated every night.

Price $84.99
Pricier than about 73% of the 1,309 comparable items (median $47.99).

Specifications

Product
Brand nameRode
Model nameLavalier GO
Part numberLAVGO
Product colorBlack
Audio & video
Mic sensitivity35 decibels
Mic impedance3000 ohm
Mic signal-to-noise ratio67 decibels
Ports & slots
Connection3.5 mm Jack

Questions about this item

How do I install the Lavalier GO and what step do people often miss?

Connect the 3.5mm TRS plug to a compatible microphone input, clip the 4.0mm capsule near the mouth, and fit the supplied foam pop shield — the step often missed is seating the shield fully over the capsule to block plosives.

What maintenance or replacement will the Lavalier GO need later?

The foam pop shield degrades with moisture and handling; replace it when it loses shape or shows residue. The Kevlar-reinforced 1.2m cable resists wear, but inspect the 3.5mm connector for bent pins after heavy use.

What limit appears first during sustained use of the Lavalier GO?

The 35 dB sensitivity and 67 dB signal-to-noise ratio mean the noise floor becomes audible before the 3000 ohm impedance causes level drop, especially with long, quiet takes on low-gain preamps.

More in Streaming & USB Microphones

Similar items