We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten carbide milling cutters with 3.175 mm shanks

Ruth's sister

Ruth's sister 10-piece 0.6-1.5 mm 3.175 mm shank internal power cable

SKU CH-R57S-6G0H5

Set of ten carbide PCB corn milling cutters with 0.6 to 1.5 mm diameters and 3.175 mm shanks for metal engraving

  • 10 cutters cover a 0.6-1.5 mm range for varied PCB tasks
  • 175 mm shank fits standard engraving machines directly
  • Carbide construction resists wear when milling metal
  • Corn-profile geometry clears chips efficiently during cutting

10-piece carbide milling set

This set contains ten carbide corn milling cutters with a 3.175 mm shank. The cutting diameters range from 0.6 mm to 1.5 mm for detailed PCB work. They are designed for machine engraving and end milling tasks. The carbide construction suits metal cutting applications.

Replaces worn or missing engraving bits

Use this set when existing cutters become dull or when a project needs the specific diameter range supplied. The jump is worth it if your current bits cannot reach the 0.6 mm to 1.5 mm sizes required. Buyers needing diameters outside this range or a different shank size will not be served by this kit.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 80% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What shank diameter do the 10 carbide PCB corn milling cutters need to fit my machine?

Each cutter has a 3.175 mm shank, so the collet or chuck must accept that exact diameter for a secure hold.

How are the 0.6 to 1.5 mm cutters installed, and what step is often missed?

Insert the 3.175 mm shank fully into the collet, tighten the collet nut to the maker's torque, then verify zero run-out before cutting.

More in Internal PSU & Riser Cables

Similar items