We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thin flat four-core cable one metre long pale grey finish

Ruth's sister

Ruth's sister 1m four-core water-leakage detection cable internal power cable

SKU CH-Z0KB-E0DJQ

Four-core water-leakage detection cable operates on 12V to 24V power and senses liquid conductivity from -10°C to 50°C

  • Detects leaks through liquid conductivity for reliable alerts
  • Connects directly to alarm host for immediate notification
  • Works as wireless detector accessory for flexible deployment
  • Operates on 12V to 24V power supply across 20% to 100% humidity
  • Functions from -10 to 50 degrees Celsius in demanding environments

Water-leak detection cable

This four-core sensing cable detects liquid presence along its full length using conductivity principles. It connects directly to a 12V or 24V alarm host and operates reliably between minus 10 and 50 degrees Celsius with humidity up to 100 percent RH. The standard detection length is 1000 mm and the cable weighs 20 g. Installation is straightforward and requires no special tools.

Builders needing leak monitoring

Installers fitting server rooms, plant rooms or under-floor spaces will value the simple wired probe that plugs straight into an existing alarm panel. Users who require wireless alerting can pair the cable with a compatible wireless detector module. Buyers who need detection zones longer than the supplied metre should look at something else because the standard length is fixed at 1000 mm unless a custom length is ordered.

12 V to 24 V operating voltage

The cable only functions when powered from a 12 V to 24 V DC source, so the alarm host or detector must supply voltage within that range. If the host provides a different voltage the probe will not operate and no leak signal will be generated.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 80% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What length detection cable is included and how is it mounted?

The standard detection cable is 1000 mm long and can be laid along floors or equipment bases; it has no built-in clips so you secure it with cable ties or adhesive tape.

How do I connect the four-core cable to a 12 V – 24 V alarm host and what wiring mistake should I avoid?

Wire the four cores to the host’s normally-open input terminals; the common error is reversing the polarity on the 12 V – 24 V supply, which prevents detection.

Will the sensing cable degrade and need replacement after prolonged exposure to moisture?

The cable operates from -10 °C to 50 °C at 20 % – 100 % RH and uses liquid conductivity, so it does not consume a sensing element and requires no scheduled replacement.

More in Internal PSU & Riser Cables

Similar items