We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small FPV camera with 3.6 mm lens and 32-channel 600 mW transmitter

Ruth's sister

Ruth's sister 3.6 mm Camera 600 mW 32-Channel Transmitter internal power cable

SKU CH-8XW9-WZXBM

A 3.6 mm FPV camera with 700 TVL resolution and a 600 mW 32-channel transmitter

  • Easy FPV setup with simple installation
  • Clear 700 TVL video from 3.6 mm lens
  • Strong 600 mW signal reaches far
  • 32 channels avoid frequency conflicts

3.6 mm FPV Camera & Transmitter

This 3.6 mm FPV camera pairs with a 600 mW 32-channel transmitter for first-person-view flying. It delivers 700 TVL horizontal resolution and is built for pilots who want a compact all-in-one video solution. The unit suits quadcopters and fixed-wing models that need a lightweight camera and transmitter combination. It is not intended for users who require HD digital video or recording capability.

Internal Power Cable Installation

The internal power cable connects the camera-transmitter unit to the flight battery or power distribution board. Solder or crimp the leads securely and insulate every joint to prevent shorts. A loose connection or reversed polarity will cause video loss or permanent damage. Route the cable away from motor wires and propellers to avoid vibration fatigue and interference.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $19.99
Pricier than about 61% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the 700 TVL 3.6 mm camera is transmitting clearly after installation?

Power the system and check the video feed on your FPV monitor or goggles; a sharp, stable picture with no static on any of the 32 channels confirms the 600 mW transmitter and camera are working together.

What items are included and what must I supply separately?

The package contains the 3.6 mm FPV camera and the 600 mW 32-channel transmitter; you will need to provide a compatible power source, video receiver, antenna and any mounting hardware for your airframe.

More in Internal PSU & Riser Cables

Similar items