We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Internal power cable with small connector for 50x50mm Sunon blower fan

Ruth's sister

Ruth's sister internal power cable for Sunon 5020 GB1205PKV3-8AY 12V 1.1W 1.4W 50x50x20mm

SKU CH-6F36-1HQBS

Connects power to Sunon 5020 GB1205PKV3-8AY 12V centrifugal cooling fans measuring 50x50x20mm

  • Designed for Sunon 5020 blower fans
  • Supports 12V operation at 1.1W or 1.4W
  • Fits 50x50x20mm centrifugal cooling units
  • New internal power cable for projector cooling

Internal power cable for Sunon 5020 blower fan

This cable is made to connect a Sunon 5020 GB1205PKV3-8AY 12 V centrifugal blower fan to a power source. It suits builders or technicians who need a direct replacement lead for that specific fan model. The item is supplied new and matches the fan's 12 V rating. No other fan models are supported by this cable.

Power delivery for 1.1 W and 1.4 W variants

The cable carries 12 V DC to fans rated at 1.1 W or 1.4 W. In normal use it handles the low current draw of these blower units without noticeable voltage drop. The fan itself is a 50 x 50 x 20 mm centrifugal projector type, so cooling performance and noise depend on that fan, not on the cable. The lead adds no active components or resistance that would affect thermals.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $15.99
Typical for this category: the median of 7,839 items is $14.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the two-pin header on this cable to the Sunon 5020 GB1205PKV3-8AY fan?

Align the connector with the fan's two-pin header, matching the 12 V and ground pins, then press straight in until the latch clicks; forcing it at an angle bends the pins and prevents the fan from starting.

When should I replace this power cable for the Sunon 5020 blower fan?

Replace the cable if the insulation cracks, the connector pins discolour from heat, or the fan draws 1.1 W or 1.4 W intermittently because of a loose crimp.

More in Internal PSU & Riser Cables

Similar items