We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ruth's sister

Ruth's sister Internal Power Cable for ThinkPad T410 45M2721 45M2722

SKU CH-0VGN-0TFCP

Replacement CPU cooler fan for Lenovo ThinkPad T410 models 45M2721 and 45M2722

  • Replaces the original fan on ThinkPad T410 models
  • Matches part numbers 45M2721 and 45M2722 for direct fit
  • New condition ensures reliable cooling performance
  • Designed specifically for T410 and T410I notebooks

CPU Cooler Fan for ThinkPad T410

This CPU cooler fan fits Lenovo ThinkPad T410 and T410I models using part numbers 45M2721 and 45M2722. It replaces the original internal cooling assembly to restore proper airflow over the processor. Buyers needing a different form factor or a GPU cooling solution should look elsewhere.

Thermals noise and power draw

The fan draws power directly from the motherboard header during normal operation. It spins to move heat away from the CPU heatsink under typical workloads. Acoustic output varies with rotational speed as the system regulates temperature. No separate power adapter is required.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 90% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the CPU cooler fan in a ThinkPad T410 and which step do people often miss?

Remove the bottom case, disconnect the old fan cable from the system board, lift the heat-sink assembly, fit the new 45M2721 fan, re-secure the heat-sink screws in a cross pattern, reconnect the cable, then reassemble — the step most skip is re-applying thermal compound on the CPU and GPU dies before tightening the heat sink.

What maintenance or replacement will this 45M2722 cooler fan need later?

Expect to clean dust from the heatsink fins every six to twelve months using compressed air; if bearing noise appears or airflow drops, replace the fan unit again with a matching 45M2721 part.

More in Internal PSU & Riser Cables

Similar items