We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB adapter cable with SATA and IDE connectors for 2.5 and 3.5 inch drives

Ruth's sister

Ruth's sister SATA/PATA/IDE to USB 2.0 Adapter for 2.5/3.5 Inch Hard Drive

SKU CH-A3BC-QG1A4

Connects 2.5 and 3.5 inch SATA, PATA and IDE drives to a USB 2.0 port for data access

  • Connect 2.5 or 3.5 inch drives via USB 2.0
  • Read SATA, PATA and IDE drives with one adapter
  • Power larger drives using the included supply
  • Retrieve data from legacy storage without an internal bay

Connect SATA, PATA and IDE drives via USB 2.0

This adapter converts SATA, PATA or IDE hard drives with 2.5 or 3.5 inch form factors to a USB 2.0 connection. It lets technicians and hobbyists access data from legacy drives without installing them inside a case. The cable draws power from the host port for 2.5 inch units while larger drives use the included supply.

Upgrade from internal-only or dock-based access

Replaces the need to open a chassis or occupy a drive bay when retrieving files from older storage. The jump is worth it when you need quick, portable access to mixed drive types and do not require the throughput of a faster USB standard.

How it compares

Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 92% of the 1,721 comparable items (median $22.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What physical space does the USB 2.0 adapter cable need to connect a 3.5 inch hard drive?

The adapter plugs into a standard USB port and the drive's SATA or IDE connector; allow room for the cable length and the drive's own width.

How is the adapter installed, and what step is often missed when switching between 2.5 and 3.5 inch drives?

Connect the drive's data and power connectors to the adapter, then plug the USB end into the computer; remember to change the power setting on the adapter for the drive size used.

More in SATA, IDE & M.2 Drive Adapters

Similar items