SAMSUNG MZ-7L324000 PM893 240GB 2.5" SATA enterprise SSD
- 240 GB
- 2.5 in (6.35 cm)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2.5-inch SATA enterprise SSD with 960 GB capacity, up to 550 MB/s reads and 1 DWPD endurance
Capacity 960GB
The Samsung PM893 is a 2.5-inch SATA solid-state drive built for servers and storage arrays that need consistent performance across read-heavy and write-heavy tasks. Its V-NAND TLC memory and Metis controller deliver up to 550 MBps sequential read and 520 MBps sequential write with 98,000 and 30,000 random 4 KB IOPS respectively.
At 960 GB the drive provides enough space for operating systems, databases and virtual-machine images while its 1 drive-write-per-day rating and 1,752 TBW total endurance cover typical mixed enterprise workloads. Workloads that exceed daily full-drive rewrites or require higher write endurance will run out of guaranteed lifespan sooner.
The SATA 600 interface caps maximum throughput at the drive’s rated 550 MBps read and 520 MBps write, so the drive cannot scale beyond that bandwidth ceiling. Systems that need higher queue depths or lower latency than SATA allows will not benefit from faster flash on this interface.
Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SAMSUNG |
| Model name | PM893 |
| Part number | MZ-7L396000 |
| Total capacity | 960 GB |
| Performance | |
| Sequential read speed | Up to 550 MB/s |
| Sequential write speed | Up to 520 MB/s |
| Random read (4K) | Up to 98,000 IOPS |
| Random write (4K) | Up to 30,000 IOPS |
| Storage | |
| NAND flash type | V-NAND TLC |
| Controller chip | Samsung Metis Controller |
| Cache memory | Samsung Low Power SDRAM |
| Write endurance | 1 DWPD |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 1.5 W |
| Active power draw | Read/Write: 2.1 W / 3.2 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Overall width | 69.85 mm |
| Product depth | 100 mm |
| Product weight | 70 g |
| Shipping weight | 0.12 kg |
| Package size | 178 × 127 × 15 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Max shock tolerance | 1,500G & 0.5 ms (Half sine) |
| More details | |
| Mean time between failures | 2,000,000 h |
Other versions of this model
The drive uses the SATA III interface rated at 600 MBps and is backward compatible with 3 Gbps SATA backplanes, though sequential speeds will be limited by the slower link.
Run a sequential read and write test with a tool such as CrystalDiskMark or fio and compare the results to the 550 MBps read and 520 MBps write specifications.
The drive is supplied as a bare 2.5" unit measuring 100.00 mm x 69.85 mm x 7.00 mm and weighing 70.00 g; brackets and cables must be purchased separately.
More in Server & Data Center SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?