XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2.5-inch SATA internal SSD with 2TB MLC storage, 64MB DRAM cache and sequential speeds up to 545MB/s read and 450MB/s write
The SanDisk SSD PLUS is a 2TB internal solid state drive built for consumer laptops and desktops. It uses a 2.5 inch form factor and connects through the SATA III interface. MLC memory and a 64MB DRAM cache support sequential reads up to 545 MBps and writes up to 450 MBps.
The drive measures 7.00mm in height and 69.85mm in width, matching standard 2.5 inch drive bays. With no moving parts it resists shock up to 1500G and vibration up to 4.9 gRMS at 7-800 Hz and 5 gRMS at 10-2000 Hz. Operating temperature range is 0°C to 70°C.
Replacing a traditional hard disk with this SSD delivers faster boot-ups, shutdowns and application response times. The jump is worth it when an older system feels slow during everyday tasks and a 2TB capacity is needed for the operating system, programs and personal files.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SanDisk |
| Product line | SSD PLUS |
| Model name | SDSSDA-2T00-G26 |
| Part number | SDSSDA-2T00-G26 |
| Total capacity | 2 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 545 MB/s |
| Sequential write speed | Up to 450 MB/s |
| Storage | |
| NAND flash type | MLC |
| Cache memory | 64 MB DRAM |
| Connectivity | |
| Connection protocol | SATA |
| Ports & slots | |
| Interface type | SATA III |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Overall width | 69.85 mm |
| Product depth | 100.5 mm |
| Product weight | 32g |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Max shock tolerance | 1500G |
| Vibration tolerance | 5 gRMS, 10-2000 Hz 4.9 gRMS, 7-800 Hz |
The drive is rated for up to 545 MB/s sequential read and up to 450 MB/s sequential write over its SATA III connection.
It measures 69.85 mm wide by 7.00 mm high, matching the standard 2.5 inch form factor.
Connect the SATA data and power cables, secure the drive in the bay, then initialise and format the new volume in the operating system before use.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?