We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red SATA cable with straight and right-angle latching connectors, 40in length

SATAGear

SATAGear SSL-1MSR SATA cable 40in straight to right angle latching

SKU CH-JYYJ-7B8AF

A 40in SATA cable with straight and right-angle latching connectors supporting 6Gbps data rates

  • 6Gbps signal rate supports fast SATA storage
  • 40in straight-to-right-angle reach fits full-tower builds
  • Auto-releasable latches lock securely yet release if pulled
  • Hot-plug enabled for drive swaps without power-down
  • Latching connectors prevent accidental disconnects in desktop use

SATAGear SSL-1MSR 40in SATA cable

This SATAGear SSL-1MSR cable connects SATA hard drives, solid-state drives or optical drives to a motherboard or controller. It carries a 6 Gbps signal rate and uses auto-releasable latches on both ends to resist accidental pulls. The 40 inch length suits full-tower chassis or external drive enclosures. Hot-plug operation is supported for drive swaps without a reboot.

Builders who need a secure internal link

The right-angle connector helps route the cable along tight drive cages or behind motherboard trays where a straight plug would foul other components. Latching headers keep the connection firm during vibration or transport. Buyers who require an external eSATA bracket connection should look at a different cable type. Installations that need a shorter run for cable management will find this length excessive.

40 inch straight to right-angle latching SATA cable

The single specification that decides fit is the 40 inch straight-to-right-angle latching layout. Measure the path from your drive bay to the motherboard SATA port; if the distance exceeds this length or a straight-to-straight orientation is required, this part will not work. The 6 Gbps rating matches the SATA 3.0 standard for current mechanical and solid-state drives.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $0.78
Cheaper than about 99% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Model nameSSL-1MSR

Questions about this item

What does the 6 Gbps rate mean once the cable is installed in a system?

The cable supports the SATA 6 Gbps signalling standard, so a connected drive can run at its full SATA III speed without the cable becoming a bottleneck.

Which SATA standard does the interface follow and what does that cap in practice?

It follows the SATA 6 Gbps specification, cabling the link at up to 6 Gbps and working with any SATA revision device through backward compatibility.

What clearance does the straight-to-right-angle design need to fit inside a case?

The right-angle plug sits close to the drive or motherboard header, letting the cable run parallel to the board in tight spaces where a straight connector would foul other components.

More in SATA & eSATA Drive Cables

Similar items