SatelliteSale RG-6/U Coaxial RF Cable F-Type Male-Male 25 ft Black
- 1 x F-Type to 1 x F…
- Coax Cables
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 50 ft white RG-6/U coaxial cable with male-to-male F-type connectors for indoor or outdoor antenna, cable and satellite connections
Color White
Length 50 ft.
This 50 ft RG-6/U coaxial cable carries signals from off-air antennas, cable providers and satellite dishes to televisions, modems and receivers. The male-to-male F-type connectors fit standard 75 Ohm ports on most home entertainment and broadband equipment. It is built for indoor or outdoor routing where a single long run is required.
A copper conductor sits inside a dielectric insulator wrapped with aluminium foil and a steel braid, all covered by a white PVC jacket. The construction is rated for signals up to 3 GHz and supports 1080i video at 60 Hz with PCM stereo or compressed 5.10 surround sound. Bi-directional data passes without added distortion on typical residential runs.
The 18 AWG centre conductor and triple shield suit installs where older dual-shield cable caused pixelation or modem sync drops. It is not for buyers who need runs longer than 50 ft without a signal amplifier, or for systems that demand quad-shield grade for high-interference environments.
Measured against everything we stock in Coaxial RF & Antenna Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SatelliteSale |
| Model name | Indoor-White-50 ft |
| Product type | Coax Cables |
| Product color | White |
| Performance | |
| Rated speed | Up to 3 GHz impedance, up to 1 Gbit/s internet applications |
| Display | |
| Refresh frequency | 1080i at 60 Hz |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x F-Type to 1 x F-Type |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 50 ft (15.2 m) |
| Cable shielding | Triple-shielded |
| Conductor type | Copper Conductor |
| Build details | Dielectric Insulator, Aluminum Foil Shield, Steel Shield, PVC Jacket |
| Compatibility | |
| Supported platforms | Supports all operating systems |
Other versions of this model
Screw each male F-Type connector clockwise onto the device ports by hand, then tighten gently with a wrench; the step often missed is not over-tightening, which can damage the center pin or strip threads.
Inspect the PVC jacket annually for UV cracking or water ingress at the connectors; replace the cable if the jacket splits, corrosion appears on the F-Type pins, or signal loss increases noticeably.
Attenuation rises with frequency and length, so the 50 ft run will hit its practical loss ceiling at the upper end of the 3 GHz range before the 1 Gbps data rating or 75 Ohm impedance match becomes the bottleneck.
More in Coaxial RF & Antenna Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?