Sabrent EC-SSHD USB 3.0 to 2.5" SATA Hard Drive Adapter
- 4 In
- USB 3.0 to SSD/2.5…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects an M.2 M-Key 2260 NVMe drive to a Mini SAS SFF-8087 port at 12Gbps using 30AWG wire
This 1m cable connects an M.2 M-Key 2260 NVMe device directly to a Mini SAS SFF-8087 interface. It supports 12Gbps transmission speed using 30AWG wire for stable signal integrity. The plug-and-play design simplifies installation inside servers and equipment cabinets. It serves as a dedicated wiring accessory for RAID controllers and storage devices.
Builders linking an M.2 M-Key 2260 NVMe drive to a Mini SAS SFF-8087 port will find this cable fits the requirement. It is not for users needing a different M.2 key type or length. Buyers requiring alternative form factors or protocol conversions should look elsewhere. The fixed 1m length suits internal cabinet wiring but not longer runs.
The cable delivers 12Gbps high-speed data transfer across its 30AWG conductors. This specification determines whether the link meets the bandwidth demands of the target RAID or storage system. Verify that both the NVMe device and the Mini SAS SFF-8087 controller support this signalling rate. The wire gauge and speed rating are the critical compatibility factors.
Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The cable is a standalone adapter; the M.Key 2260 NVMe device and the Mini SAS SFF-8087 host controller must be purchased separately.
Choose this version when your RAID controller or server backplane supports 12Gbps SAS and you need the 30AWG wire’s flexibility for tight 1m internal routing.
The link can transfer up to 12Gbps between the NVMe drive and the SAS RAID controller, so the SSD’s throughput is limited by the slower of the drive or the controller.
More in SATA, IDE & M.2 Drive Adapters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?