SMUGDESK ATX Mini 4-Pin to 2× Right-Angle 15Pin SATA Power Splitter Cord 45cm 2 Pack
Converts one mini 4-pin ATX output into two right-angle 15Pin SATA power connectors with 45cm cables for compact builds
- Converts one mini 4-pin ATX output into two SATA power ports
- 90-degree right-angle connectors save chassis space and reduce cable strain
- 45cm length enables tidy internal routing and airflow
- Powers HDDs, SSDs and optical drives with stable current
- Two cables per pack support multi-drive expansion needs
Mini 4-Pin ATX to Dual SATA Splitter
This cable converts a single motherboard mini 4-pin power output into two 15Pin SATA power connectors. It is intended for builders adding multiple SATA hard drives, SSDs or optical drives to a custom PC or storage workstation. The pack contains two splitter cords for multi-disk expansion.
Right-Angle Connectors and Shared Power Load
Each SATA plug uses a 90-degree right-angle design that saves chassis space and reduces cable strain in compact cases. The 45cm length allows tidy internal routing without excess slack. Power is shared across both ports, so connecting multiple high-draw mechanical drives at once may exceed the available current.
Installation Checks and Common Pitfalls
Verify the pin definition of your motherboard mini 4-pin socket before plugging in the splitter to avoid hardware damage. The right-angle orientation must match the drive bay layout; forcing a misaligned connector can bend pins. Do not daisy-chain additional splitters beyond the two provided ports.
How it compares
Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 75% of the 433 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How many SATA drives can I power with each splitter cable?
Each cable splits one mini 4-pin ATX connector into two right-angle 15-pin SATA power ports for two drives.
Will the 45cm length reach drives mounted at the bottom of a mid-tower case?
The 45cm cable provides enough slack for typical internal routing from the motherboard area to lower drive bays.
Does the right-angle 15-pin SATA connector fit drives with limited clearance?
The 90-degree connector sits flush against the drive, reducing cable bend and saving space in tight chassis.
More in Y-Splitter Power Cables
Similar items
SXDOOL KZ5387 6-pin to dual 6+2-pin power splitter cord 5pcs 20cm 18AWG
- Case Fan Accessory
SXDOOL 16 AWG 8-Pin to Dual 8-Pin (6+2) Power Splitter Cord 30.5 cm 4-Pack
- Case Fan Accessory
Jstincal 2-Pack White ARGB 1-to-3 Splitter Cables 5V 3-Pin 11.8in
- 3 in to Female-to-F…
- Female to Female
Cable Matters 30CM-USBC-FEMALE-2MALE-BK power splitter cord
- DVI to DVI
- Speaker Wires





