SMUGDESK DisplayPort 1.4 cable 10m 33ft 8K 60Hz 4K 144Hz HBR3 32.4Gbps
A 10 metre fibre-optic DisplayPort 1.4 cable delivering 8K at 60 Hz or 4K at 144 Hz with HBR3 32.4 Gbps bandwidth, HDCP 2.2 and DSC 1.2 support
Cable Length 33 Feet
- 8K resolution at 60 Hz for ultra-sharp visuals
- 4K at 144 Hz refresh rate for smooth gaming motion
- HBR3 bandwidth of 32.4 Gbps carries high-bitrate signals
- 10 m / 33 ft optical fibre reaches distant displays
- Directional connectors ensure correct source-to-display link
10 m DisplayPort 1.4 cable
The SMUGDESK cable is a new DisplayPort 1.4 link rated for HBR3 bandwidth of 32.4 Gbps. It carries 8K at 60 Hz or 4K at 144 Hz over a 10 metre, 33 foot optical fibre run. The connection is directional, with marked Source and Display ends, and supports HDCP 2.2, DSC 1.2 and HDR.
Who this suits and who should look elsewhere
The cable suits users who need an 8K or high-refresh 4K signal across a room or through conduit where copper cables would lose integrity. It is not for builders who need a short passive copper link, buyers who want a bi-directional plug, or installations that cannot accommodate a fixed source-to-display orientation.
Bandwidth and resolution ceiling
The single specification that decides fit is the HBR3 32.4 Gbps rating enabling 8K at 60 Hz and 4K at 144 Hz with DSC 1.2 compression. If the target display and source both support this bandwidth tier the cable will deliver the full signal; if either device is limited to a lower tier the extra headroom goes unused.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $52.99
- Pricier than about 82% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
SMUGDESK DisplayPort 1.4 cable 8K 60Hz 4K 144Hz 4K 120Hz HBR3 HDR VESA 10m 33ft
Questions about this item
How much power does the SMUGDESK DisplayPort 1.4 cable draw during all-day 8K 60Hz use?
The cable uses optical fiber for long-distance transmission and requires no external power adapter; it draws only the small amount supplied by the DisplayPort source port.
Which devices must I already own to use the 10m 33ft cable at 4K 144Hz?
You need a DisplayPort 1.4 source with HBR3 32.4Gbps output and DSC 1.2 support, plus a DisplayPort 1.4 monitor that accepts 4K 144Hz or 8K 60Hz input.
Will the directional Source and Display ends work with my older DisplayPort 1.2 monitor?
Yes, the cable is backward compatible; the Source plug goes into the GPU and the Display plug into the monitor, but the link will run at DisplayPort 1.2 speeds rather than 8K 60Hz.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
ESTONE TJ-A077 DisplayPort 1.4 fiber cable 33 ft 8K 60 Hz 4K 144 Hz 32.4 Gbps
- 33 ft (10.1 m)
- DisplayPort
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
LUOM TJ-A022 DisplayPort 1.4 fiber optic cable 50 ft 32.4 Gbps 8K 60 Hz 4K 144 Hz
- 50 ft (15.2 m)
- DisplayPort
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
Jansicotek TJ-A022 DisplayPort cable 66 ft 8K 60 Hz 32.4 Gbps
- 66 ft (20.1 m)
- DisplayPort










