SMUGDESK DisplayPort 2.0 cable 1 m 80 Gbps
A 1 m DisplayPort 2.0 cable delivering 80 Gbps bandwidth for 16K at 60 Hz, 8K at 120 Hz and 4K up to 240 Hz with HDR and DSC support
- Drives 16K at 60 Hz with 80 Gbps bandwidth
- Delivers 4K at 165 Hz for ultra-smooth gaming
- Backward compatible with DP 1.4 and DP 1.2
- Braided jacket with gold-plated connectors resists wear
- Supports dynamic HDR and DSC 1.2a for vivid colour
What this cable is for
This DisplayPort 2.0 cable carries up to 80 Gbps between a graphics card or laptop and a high-refresh monitor. It supports 16K at 60 Hz with DSC, 10K at 60 Hz uncompressed, 8K at 120 Hz, and 4K at up to 240 Hz. The one-metre braided length suits desktop setups where the display sits close to the source.
Thermals noise and power
As a passive copper cable it generates no heat and adds no audible noise to the system. Power draw is limited to the small amount required for the DisplayPort auxiliary channel, so it does not affect the GPU power budget or require an external supply.
Upgrade path and limits
The cable replaces any older DisplayPort 1.4 or 1.2 link that cannot sustain 4K above 144 Hz or 8K at 60 Hz without compression. It is not for runs longer than one metre, for users who need 16K at 120 Hz, or for builders who require a locking connector rated for frequent hot-plug cycles.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 70% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
SMUGDESK DisplayPort 2.0 cable 3.3ft 80Gbps 16K 60Hz 4K 165Hz braided
SMUGDESK 8K Mini DisplayPort to DisplayPort 1.4 Cable 4K@120Hz 32.4Gbps 3.3FT
SMUGDESK Mini DisplayPort to DisplayPort 1.4 cable 10ft 32.4Gbps 8K@60Hz 4K@144Hz 2K@240Hz HDR
Questions about this item
How do I plug in the 1 m DisplayPort 2.0 cable so the 80 Gbps link trains at 16K 60 Hz?
Connect the gold-plated DisplayPort plugs firmly into the source and display until the latches click; verify the monitor reports 15360 x 8640 at 60 Hz in its OSD to confirm full 80 Gbps operation.
Will the braided jacket or gold-plated contacts need any cleaning or replacement over time?
The braided jacket and gold-plated connectors are passive; no scheduled cleaning or replacement is required — just reseat the plugs if the link drops to a lower rate.
At what point does sustained 4K gaming hit a refresh-rate ceiling on this cable?
The cable supports 4K 3840 x 2160 up to 240 Hz uncompressed; sustained use beyond 240 Hz would exceed the 80 Gbps bandwidth limit.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
ESTONE BK-CD2 USB-C to DisplayPort 1.4 cable 3.3 ft black
- 3.3 ft (1.01 m)
- DisplayPort Cable
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
ESTONE TJ-A033 DisplayPort 1.4 cable 6.6 ft 8K@60Hz 4K@144Hz 2K@240Hz HBR3 32.4 Gbps
- 6.6 ft (2.01 m)
- DisplayPort Cable
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
ESTONE TJ-A028 DisplayPort extension cable 6.6 ft 8K@60Hz 4K@144Hz 32.4Gbps HBR3 black
- 6.6 ft (2.01 m)
- DisplayPort Cable










