SMUGDESK DisplayPort 2.0 cable 2 m 80 Gbps 16K 60 Hz
A 2 m DisplayPort 2.0 cable carrying 80 Gbps for 16K at 60 Hz, 8K at 120 Hz and 4K up to 240 Hz with HDR and DSC support
- Drives 16K resolution at 60 Hz for ultra-detailed visuals
- Delivers 80 Gbps bandwidth for stable, high-speed transmission
- Supports 4K at 165 Hz refresh rate for smooth gaming
- Compatible with DP 1.4 and DP 1.2 devices for broad use
- Braided construction with gold-plated connectors ensures durable connection
Built for 16K 60 Hz workflows
This DisplayPort 2.0 cable carries 80 Gbps over two metres, delivering 16K at 60 Hz with DSC or 10K at 60 Hz uncompressed. It suits professionals and enthusiasts driving ultra-high-resolution monitors from modern graphics cards or laptops. Gold-plated connectors and a braided jacket protect signal integrity on long runs.
Not for legacy-only ports
Buyers whose source or display tops out at DisplayPort 1.2 will not reach the advertised refresh rates; the cable works but the link negotiates down to 4K 144 Hz or lower. Anyone needing runs longer than two metres or an angled connector for tight rear-I/O clearance should look at a different length or form factor.
Plug-and-play with secure latch
The standard DisplayPort latch clicks firmly into GPUs, laptops and monitors; no drivers or firmware are required. The only common snag is forcing the connector upside-down — check the notch orientation before pressing. Once seated, the braided sleeve resists kinks during cable routing behind desks or through grommets.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 60% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
Which DisplayPort version must my graphics card and monitor support to use the 16K 60 Hz mode of this cable?
Both source and display need DisplayPort 2.0 with DSC enabled to reach 16K at 60 Hz over this 80 Gbps link.
Will this cable work with my existing DisplayPort 1.4 monitor running at 4K 144 Hz?
Yes, the cable is backward compatible with DP 1.4 and will carry 4K at 144 Hz without compression.
How can I verify the cable is delivering 80 Gbps after I connect it?
Check your GPU control panel or monitor OSD — they should report a link speed of 80 Gbps and show 16K 60 Hz or 4K 240 Hz as available modes.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
ESTONE TJ-A285BK DisplayPort 2.1 cable 10 ft 80Gbps 16K@30Hz
- 10 ft (3.05 m)
- DisplayPort Cable
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
ESTONE TJ-A033 DisplayPort cable 10 ft
- 10 ft (3.05 m)
- DisplayPort Cable
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
ESTONE A0108 DisplayPort 2.1 cable 6.6 ft 80Gbps 16K@60Hz
- 6.6 ft (2.01 m)
- DisplayPort Cable










