We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with 40-pin IDE connector and SATA port plus 7-pin SATA cable

SMUGDESK

SMUGDESK IDE PATA 40Pin to SATA Female Converter with 7Pin Cable for 3.5inch HDD

SKU CH-36T7-A8WP7

Converts 40-pin PATA IDE 3.5-inch hard drives to SATA for use on modern motherboards, includes 7-pin data cable, driver-free hardware design

  • Connect legacy 3.5inch IDE drives to modern SATA motherboards
  • 40pin PATA to SATA female hardware conversion
  • Includes 7pin SATA data cable for motherboard link
  • Plug and play operation with no drivers needed
  • Enables old data recovery and drive reuse projects

IDE PATA 40-Pin to SATA Converter

This adapter board converts a 40-pin parallel ATA hard drive to a SATA interface. It allows a 3.5-inch IDE drive to connect to a modern desktop motherboard. The package includes a 7-pin SATA data cable for the motherboard connection. No driver installation is required for operation.

Suits legacy drive recovery and hardware reuse

Buyers needing to access data from vintage 40-pin PATA desktop drives on SATA-only systems will find this suitable. It is not for users with 44-pin notebook IDE drives, as the connector pin count differs. The adapter also does not supply power; a separate 4-pin Molex connection to the drive is still necessary. Builders without a free Molex lead or a SATA port on the motherboard cannot use this converter.

40-pin PATA IDE interface compatibility

This converter works exclusively with 3.5-inch hard drives that use the 40-pin parallel ATA interface. It will not function with 44-pin laptop drives or any other interface type. Verifying the drive connector before purchase is essential. The single specification that decides fit is the 40-pin PATA interface on the target hard drive.

How it compares

Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 77% of the 1,721 comparable items (median $22.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Will this 40pin converter board fit inside a standard desktop case alongside a 3.5inch drive?

The bareboard PCBA is compact and designed to save installation space inside a computer case, so it fits alongside a 3.5inch drive in standard desktop chassis.

What is the step people get wrong when installing this IDE to SATA adapter?

Connect the 40pin IDE drive to the converter, attach the included 7pin SATA data cable from the converter to the motherboard, and do not forget the separate 4pin Molex power connector for the drive.

Does the 7pin SATA data cable included with this converter need periodic replacement?

The 7pin SATA data cable is a passive component with no moving parts and does not require scheduled replacement under normal use.

More in SATA, IDE & M.2 Drive Adapters

Similar items