We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with M.2 slot and SATA connector

SMUGDESK

SMUGDESK M.2 NGFF SATA 3.0 to 7-Pin SATA III Converter Adapter Card

SKU CH-EPH1-EV6ZP

Converts an M.2 NGFF SATA 3.0 SSD to a standard 7-pin SATA III port for storage upgrades and disk testing

  • Converts M.2 NGFF SATA SSD to standard 7-pin SATA III port
  • SATA III 6Gbps bandwidth maintains reliable read and write speeds
  • Plug-and-play operation on Windows, Mac and Linux without extra drivers
  • Compact PCB fits tight spaces for DIY upgrades and disk testing
  • Only for M.2 NGFF SATA drives — not compatible with NVMe or PCIe M.2 SSDs

M.2 NGFF SATA to SATA III adapter

This adapter converts an M.2 NGFF SATA 3.0 SSD into a standard 7-pin SATA III device. It lets you use an M.2 SATA drive in motherboards, enclosures or docks that only have regular SATA ports. The board is built for DIY upgrades, disk testing and reusing older SSDs. It is not compatible with NVMe or PCIe M.2 drives.

Passive operation with SATA III 6Gbps

The adapter has no active components, so it adds no fan noise or extra power draw beyond the drive itself. It passes through the SATA III 6Gbps bandwidth for stable read and write speeds during file copies, OS installs and diagnostics. Plug-and-play support works on most Windows, Mac and Linux systems without driver installation.

Compact PCB for tight installations

The small board fits into cramped drive bays or enclosures where a bare M.2 slot is missing. It only requires a free SATA data port and a SATA power connector from the host system. Secure mounting of the M.2 SSD is essential to avoid contact issues. Builders needing NVMe support or a second M.2 slot must choose a different solution.

How it compares

Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 77% of the 1,721 comparable items (median $22.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the SMUGDESK M.2 NGFF SATA 3.0 adapter and what step causes poor contact?

Insert the M.2 NGFF SATA SSD into the slot, secure it with the mounting screw, then connect the 7-pin SATA cable. The step people miss is tightening the screw fully; a loose SSD causes detection failures.

What maintenance or replacement will the SMUGDESK M.2 NGFF SATA 3.0 converter need later?

The passive PCB has no wearing parts. Reseat the M.2 drive and SATA cable if the system stops detecting the SSD after moves or vibration.

What limit appears first when the SMUGDESK M.2 NGFF SATA 3.0 adapter runs sustained transfers?

The SATA III 6Gbps link caps throughput, so the drive saturates the bus before the adapter itself becomes a bottleneck.

More in SATA, IDE & M.2 Drive Adapters

Similar items