Sabrent EC-SSHD USB 3.0 to 2.5" SATA Hard Drive Adapter
- 4 In
- USB 3.0 to SSD/2.5…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Dual-bay PCIe 5.0/4.0 adapter adds two M.2 slots for NVMe and SATA SSDs with gold-plated PCB and P582 chip
This dual-bay adapter adds two M.2 slots to a desktop or workstation, accepting both NVMe and SATA solid-state drives. It connects through a PCIe 5.0 or 4.0 interface using the P582 control chip for high-bandwidth data transfer. The gold-plated circuit board helps maintain signal integrity during sustained workloads.
The card fits standard PCIe X4, X8 or X16 slots and secures with the included metal bracket for a firm mount. No extra drivers are required for the adapter itself, though each installed SSD may need its own driver or firmware update. The only common issue is forgetting to enable the relevant PCIe lanes in the system BIOS before booting.
Verify that your motherboard provides a PCIe 5.0 or 4.0 slot with at least four lanes for full bandwidth. Confirm each M.2 drive uses the NVMe or SATA protocol, as mixed-protocol drives are not supported. Ensure the chassis has enough physical clearance for the metal bracket and any attached heatsinks.
Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Verify each drive appears in BIOS at PCIe 5.0 x4 link width, then run a sequential read test on both simultaneously — sustained throughput near the slot ceiling shows the P582 is operating correctly.
The card, its metal bracket and mounting hardware are included; you must provide up to two M.2 NVMe or SATA SSDs and a free PCIe x4, x8 or x16 slot.
Both bays accept NVMe and SATA protocols independently, so any combination — dual NVMe, dual SATA or one of each — works without configuration changes.
More in SATA, IDE & M.2 Drive Adapters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?