SMUGDESK SATA 15Pin 1 Male to 5 Female Power Splitter Cord
Turns one SATA 15Pin power connector into five female ports for multi-drive storage expansion
- Expands one SATA 15Pin connector into five power outputs
- Supports 2.5 and 3.5 inch HDD, SSD and optical drives
- Tinned copper conductors deliver stable power with reduced voltage drop
- Reinforced strain-relief connectors prevent loose contacts under vibration
- Plug-and-play installation works with standard ATX power supplies
Power expansion for multi-drive builds
This SATA 15Pin splitter turns one male connector from your power supply into five female ports, letting you add several storage devices without extra PSU cables. It suits DIY desktop builders, small-server assemblers and anyone expanding drive bays in a standard ATX chassis.
Tinned copper wiring with moulded strain relief
Premium tinned copper conductors reduce voltage drop and resist oxidation for stable power delivery to every drive. Reinforced injection-moulded connectors with strain relief prevent loose contacts or wire fracture when cables are routed through tight chassis spaces or subjected to vibration.
Single-rail current limit applies
All five outputs share the original SATA power rail, so total current draw must stay within the connector and PSU rating. Builders planning large RAID arrays or many high-spin mechanical drives should verify the power supply can handle the combined load before connecting every device.
How it compares
Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 75% of the 433 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does the SATA 15-pin interface cap in practice?
One male connector splits into five female ports, each delivering standard SATA power to 2.5 or 3.5 drives.
What clearance does the splitter need to fit inside a chassis?
The moulded strain-relief connectors require enough room behind each drive bay for the 15-pin plugs to seat without sharp bends.
How is the cable installed and what step is often missed?
Plug the male end into a spare PSU SATA lead, then attach up to five drives; verify the PSU rail can supply the combined load before powering on.
More in Y-Splitter Power Cables
Similar items
SXDOOL KZ5387 6-pin to dual 6+2-pin power splitter cord 5pcs 20cm 18AWG
- Case Fan Accessory
SXDOOL 16 AWG 8-Pin to Dual 8-Pin (6+2) Power Splitter Cord 30.5 cm 4-Pack
- Case Fan Accessory
Jstincal 2-Pack White ARGB 1-to-3 Splitter Cables 5V 3-Pin 11.8in
- 3 in to Female-to-F…
- Female to Female
Cable Matters 30CM-USBC-FEMALE-2MALE-BK power splitter cord
- DVI to DVI
- Speaker Wires





