We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with SATA 7+15pin connector and IDE port for 2.5 or 3.5 drives

SMUGDESK

SMUGDESK SATA to PATA IDE Converter Adapter 2.5 3.5 7+15Pin

SKU CH-YT81-2Q8CN

Connects 2.5 and 3.5 inch SATA drives to legacy IDE motherboards using a 7+15pin interface with plug-and-play operation

  • Connect SATA drives to legacy IDE motherboards
  • Supports 2.5 and 3.5 inch SATA HDDs and SSDs
  • Works with SATA DVD optical drives
  • Standard 7+15pin SATA interface for direct compatibility
  • Plug-and-play operation with no driver installation required

SATA to PATA IDE Converter Adapter

This compact adapter bridges modern SATA storage devices to legacy IDE motherboards. It enables 2.5inch and 3.5inch SATA hard drives, SSDs and DVD optical drives to function on older systems equipped only with PATA ports. The module supports standard SATA 7+15pin signal and power interfaces for direct hardware compatibility. True plugandplay operation requires no driver installation for immediate device recognition.

Interface Limitations

The adapter relies on the host IDE bus for data transfer, so connected SATA devices operate at PATA interface speeds. Legacy motherboard BIOS support determines maximum drive capacity recognition and boot capability. Power delivery depends entirely on the available IDE connector and system power supply. No additional controller features or protocol translation beyond basic signal conversion are provided.

Bidirectional SATA 7+15pin Compatibility

This single specification decides suitability: the adapter must match your SATA device's standard 7+15pin connector layout. It accepts both 2.5inch and 3.5inch form factors using the same interface. Builders needing to connect drives with non-standard power arrangements or proprietary connectors cannot use this module. Systems lacking a functional IDE port require a different upgrade path entirely.

How it compares

Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 83% of the 1,721 comparable items (median $22.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Which version of the SMUGDESK adapter should I choose for a 2.5 inch SATA SSD versus a 3.5 inch SATA hard drive?

The same module works for both; its standard 7+15pin SATA interface accepts any 2.5 or 3.5 inch SATA hard drive, SSD or DVD drive.

What does the SATA 7+15pin interface mean once the adapter is installed in a legacy IDE system?

It provides the standard SATA signal and power connections so the BIOS and operating system recognise the attached SATA drive as a normal storage device.

What interface standard does the converter use and what does it limit in practice?

It uses the SATA 7+15pin standard, capping the connection to the SATA device's native speed while bridging it to the older PATA IDE motherboard port.

More in SATA, IDE & M.2 Drive Adapters

Similar items