We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with SATA and IDE connectors

SMUGDESK

SMUGDESK SATA to PATA IDE Converter Adapter 2.5 3.5 Inch

SKU CH-C0FG-HRHYA

Converts SATA drives to IDE for legacy motherboards, supporting 2.5 and 3.5 inch HDD, SSD and optical drives with plug-and-play installation

  • Connect SATA drives to legacy IDE motherboards via plug-and-play conversion
  • Supports 7+15 pin power for 2.5 and 3.5 inch HDD, SSD and optical drives
  • No driver installation needed for quick internal setup
  • Compact module board saves chassis space during installation
  • Works with SATA hard disks, SSDs and DVD drives on vintage IDE systems

SATA to IDE converter for legacy systems

This plug-and-play module converts a SATA signal to PATA IDE, letting you attach modern SATA drives to an older IDE motherboard port. It accepts 2.5 inch and 3.5 inch SATA hard drives, SSDs and optical drives using a standard 7+15 pin power connection. No driver installation is required for immediate operation.

Ideal for upgrading vintage PCs

Builders restoring or extending the life of an IDE-based desktop can reuse current SATA storage without replacing the motherboard. The compact board fits easily inside a standard chassis for internal mounting. Users whose systems already provide native SATA ports will not need this adapter.

Converts SATA to PATA IDE interface

The single decisive specification is the signal conversion from SATA to PATA IDE, which determines whether the adapter matches your motherboard's drive interface. It supports standard 7+15 pin SATA power for the connected drive. Verify that your mainboard uses an IDE port before purchasing.

How it compares

Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 90% of the 1,721 comparable items (median $22.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I install this converter and what step do people often get wrong?

Connect the SATA data and 7+15pin power cables to your 2.5 or 3.5 inch drive, then plug the IDE end into the motherboard; the step often missed is ensuring the 15pin power connector is fully seated on the drive side.

What maintenance or replacement will this adapter need later?

The board has no moving parts or firmware, so it requires no scheduled maintenance; replace it only if the onboard circuit fails or if you upgrade to a motherboard with native SATA ports.

What limit appears first under sustained use?

The adapter passes through the SATA drive's own speed ceiling, so sustained throughput is capped by the connected HDD or SSD rather than the converter itself.

More in SATA, IDE & M.2 Drive Adapters

Similar items