STARTECH PXT1011 1 ft computer power cord NEMA5-15P to C13
- Cable Connectors
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 4.5 metre C14-to-C13 extension cord rated 15 A at 250 V with 14 AWG conductors
The StarTech 15ft 4.5m C14 to C13 cord extends power from a PDU or UPS to servers, switches or workstations. Rated 15A at 250V with 14AWG conductors, it suits high-draw equipment in data-centre or lab racks. The 15-foot length bridges gaps between vertical PDU strips and mid-rack hardware. Buyers needing shorter runs or different plug types should choose another cable.
The 14AWG copper handles the rated 15A without noticeable heating during continuous operation. No active cooling is involved, so the cord adds zero acoustic noise to the environment. Power loss over the 15ft span stays within normal limits for the gauge and voltage. The UL Listed mark confirms compliance with North American safety requirements.
Moulded C14 and C13 connectors resist accidental unplugging in vibration-prone racks. Thick PVC jacket protects conductors from abrasion when routed through cable managers or tray edges. The 14AWG build tolerates repeated re-seating during maintenance cycles. Installers should verify rack depth and PDU port spacing before deployment.
Measured against everything we stock in PC Power Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | StarTech |
Plug the C14 connector into the PDU or UPS outlet and the C13 connector into the server or PSU inlet, ensuring both click fully into place; the 14AWG conductors handle 15A at 250V.
Inspect the jacket for cuts, the C13 and C14 pins for discoloration or looseness, and replace the cord if the 14AWG conductors show exposed copper or the connectors no longer latch securely.
The 14AWG conductors are rated for 15A at 250V; sustained loads above 15A will cause heating and voltage drop, so keep continuous draw at or below the 15A rating.
More in PC Power Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?