We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat6 patch cable, ten feet long, with molded RJ45 plugs on both ends

STARTECH

STARTECH C6PATCH10WH 10 ft Cat6 network ethernet cable

SKU CH-MCX3-51SNZ MPN C6PATCH10WH

A 10 ft white Cat6 patch cable with RJ45 connectors, 24 AWG stranded copper conductors, 500 MHz rating and 100 W PoE support

  • Cable category6
  • First connectorRJ45
  • Second connectorRJ45
  • Product typeNetwork Cable
  • Overall length10 ft (3.05 m)
  • Product colorWhite
  • 10 ft Cat6 cable supports 10 Gbps up to 160 ft
  • 24 AWG 100 % copper conductors ensure reliable signal
  • 500 MHz bandwidth handles multi-gigabit 1/2.5/5 Gbps speeds
  • 100 W PoE capability powers devices over the same cable
  • ETL verified and UL rated for safety compliance

White Cat6 patch cable

This 10 ft white Cat6 patch cable uses 24 AWG stranded copper conductors in a 4 pair UTP construction. It is terminated with RJ45 connectors on both ends and follows the TIA/EIA-568-B.1-2001 T568B wiring standard. The cable carries a 500 MHz bandwidth rating and supports Power over Ethernet up to 100W. It is built for installers and IT staff who need reliable structured cabling runs.

Suited for fixed desk or rack runs

The moulded strain relief and 10 ft length make it practical for permanent desk-to-switch or patch-panel connections where a white jacket aids cable identification. Buyers who need longer horizontal runs beyond 160 ft for 10 Gbps operation or who require shielded cable for high-EMI environments should look at alternative constructions. The unshielded design also means it is not intended for outdoor or direct-burial use.

Sustained 10 Gbps throughput to 160 ft

Under continuous load the 250 MHz rated cable maintains 10 Gbps signal integrity up to 160 ft, while multi-gigabit rates of 1, 2.5 and 5 Gbps are supported over the same distance. The 100% copper conductors and UL-rated jacket (E132276-A) resist heat build-up during prolonged PoE delivery at 100W. ETL verification confirms the cable meets the 500 MHz Cat6 specification for consistent performance.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 60% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameStarTech.com
Model nameC6PATCH10WH
Product typeNetwork Cable
Product colorWhite
Connectivity
Cable category6
Ports & slots
First connectorRJ45
Second connectorRJ45
Size & build
Overall length10 ft (3.05 m)
Shipping weight0.15 kg
Package size196 × 193 × 22 mm

Questions about this item

What devices need RJ45 ports to use this 10 ft Cat6 cable?

Any network equipment with standard RJ45 jacks — routers, switches, PCs, NAS units, IP cameras or PoE access points — will connect directly.

Will this 24 AWG Cat6 patch cord run at 2.5 Gbps or 5 Gbps on my older Cat5e switch ports?

The cable supports 1/2.5/5 Gbps and 10 Gbps up to 160 ft, but the link speed is limited by the lowest-rated port, so a Cat5e switch will negotiate 1 Gbps.

How can I confirm the cable is delivering PoE power after I plug it in?

Check the powered device — an IP phone, camera or access point — for normal operation lights; the cable is rated for 100 W PoE and uses 100 % copper conductors.

More in Ethernet & LAN Cables

Similar items