STARTECH LSATA8 8 in Latching SATA Cable
An 8-inch latching SATA III cable with two 7-pin receptacles supports up to 6 Gbps data transfer in tight server or workstation builds
- Cable length8 in (20.3 cm)
- Connector count2
- Connector detailsConnector A: 1–7 pin SATA Data Receptacle Connector B: 1–7 p
- Product typeCable Connectors
- Product colorRed
- Overall length8 in (20.3 cm)
Cable Length 8 in.
- 8 in.$15.99
- 12 in.$6.99
- 18 in.$11.99
- 24 in.$13.99
- 8-inch length fits tight mini-tower builds
- Latching connectors prevent accidental disconnection in servers
- SATA 6 Gbit/s throughput supports fast data transfer
- 26 AWG PVC jacket protects signal integrity
- Red colour aids quick cable identification
Purpose-built for tight builds
The StarTech LSATA8 is an 8-inch SATA III data cable with latching connectors on both ends. It targets system integrators and enthusiasts assembling mini-tower PCs, high-end workstations or server storage subsystems where cable routing space is at a premium.
Latching connectors prevent accidental disconnects
The 7-pin receptacles click into place, maintaining signal integrity under vibration or when drives are swapped in dense arrays. A red PVC jacket and 26 AWG conductors make the short run easy to identify and route alongside power cables without adding bulk.
SATA III interface caps throughput at 6 Gbps
The cable complies with Serial ATA II specifications, so connected drives negotiate at the link speed the host controller supports. It cannot accelerate a SATA II or SATA I device beyond its native rate, and it does not carry power — a separate SATA power lead is still required for every drive.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | StarTech.com |
| Model name | LSATA8 |
| Product type | Cable Connectors |
| Product color | Red |
| Ports & slots | |
| Connector count | 2 |
| Connector details | Connector A: 1–7 pin SATA Data Receptacle Connector B: 1–7 pin SATA Data Receptacle |
| Size & build | |
| Overall length | 8 in (20.3 cm) |
| Cable length | 8 in (20.3 cm) |
| Shipping weight | 0.01 kg |
| Package size | 124 × 119 × 17 mm |
Other versions of this model
3 more in the same range
STARTECH LSATA18 18in latching SATA cable M/M red
- 1.5 ft (0.46 m)
- Cable Connectors
STARTECH LSATA24 2 ft SATA cable red male to male
- 2 ft (0.61 m)
- Cable Connectors
Questions about this item
Will the 26 AWG PVC jacket degrade or need replacement inside a server chassis?
The PVC jacket and 26 AWG conductors are rated for standard internal use; no scheduled replacement is required unless physical damage occurs.
Does the 6 Gbit/s SATA III rating hold steady during continuous RAID array rebuilds?
The cable meets SATA 6 Gbit/s specification; sustained throughput is limited by the connected drives and controller, not the cable itself.
Does the red 8-inch latching cable add noticeable heat or power draw in an all-day workload?
The passive cable draws no power and generates no measurable heat; the latching connectors simply secure the link without affecting thermals.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
Nippon Labs SATA-1-MINI SATA cable 1m right-angle straight 26 AWG
- 3.28 ft (1m)
- SATA II
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables








