STARTECH PXT101L3 3 ft computer power cord NEMA 5-15P to right-angle C13

Right-angle C13 for tight spaces

The StarTech PXT101L3 is a three-foot power cord that connects a standard North American wall outlet to equipment using an IEC 60320 C13 inlet. Its right-angle C13 plug sits flush against the device, making it suitable for wall-mounted monitors, compact printers or rack-mounted gear where rear clearance is limited. Rated for 10 A at 125 V AC, it uses 18 AWG SVT cable with three conductors. The cord is supplied new in black.

Steady 10 A delivery through 18 AWG SVT

Under continuous load the 18 AWG conductors carry the full 10 A rating without exceeding temperature limits for the SVT jacket. The right-angle moulding does not introduce additional resistance, so voltage drop across the three-foot length remains within normal limits for desktop computers, monitors or office peripherals. No active cooling or derating is required for typical indoor use at the rated current.

Replaces straight C13 cords where depth is critical

This cord upgrades any existing straight C13 lead that forces equipment away from the wall or blocks adjacent ports. The improvement is worthwhile when the device sits close to a surface, when cable routing must stay inside a narrow channel, or when a flush connection reduces strain on the inlet. It does not add length, change the inlet type or increase the current rating beyond 10 A.