STARTECH PXT1011 1 ft computer power cord NEMA5-15P to C13
- Cable Connectors
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Heavy-duty 6 ft cord with a twist-lock NEMA L6-20P plug and IEC C19 connector, rated 20 A at 250 V using 12 AWG copper wire
This heavy-duty cord links equipment with an IEC 60320 C19 inlet to a NEMA L6-20P twist-lock outlet. It is built for server rooms, data centres and industrial racks where secure, high-current supply is required. The twist-lock plug prevents accidental disconnection under vibration or cable strain. UL-listed components satisfy UL62 and UL817 safety standards.
The single specification that decides fit is the 20 A 250 V NEMA L6-20P to C19 combination. Only devices drawing up to 20 amps at 250 volts with a matching C19 inlet and a facility L6-20P receptacle will work. A lower-rated plug or a different inlet type will not mate or will exceed the cord's certified capacity.
12 AWG 100 % copper conductors tested for continuity give comfortable headroom for continuous 20 A loads at the rated voltage. The 1.8 m length reaches between adjacent rack PDUs and equipment without excess slack. Runs requiring higher amperage, a different plug geometry or longer distance need a separate cable.
Measured against everything we stock in PC Power Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The cord delivers up to 20 amps at 250 volts through its 12 AWG copper conductors, matching the input requirements of high-density servers and PDUs that specify a C19 inlet.
The L6-20P locks into a matching 20 A 250 V receptacle and prevents accidental disconnection, but it will not fit a standard 5-20R or L5-20R outlet.
The IEC 60320 C19 connector adds roughly 50 mm of depth behind the inlet, so allow that space in tight rack enclosures.
More in PC Power Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?