ASUS Pro WS WRX90E-SAGE SE server motherboard
- Ryzen Threadripper…
- Socket sTR5
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Single-socket LGA 4677 board with 8 DDR5 DIMM slots for 256 GB ECC memory, 10 SATA 6.0 Gb/s ports and dual 1 GbE LAN
This ATX server motherboard supports a single 4th or 5th Gen Intel Xeon Scalable processor in an LGA 4677 socket with up to 350W TDP. It provides eight DDR5 DIMM slots for ECC registered memory up to 256GB capacity. The board includes ten SATA 6.0Gb/s ports, dual Intel I210 1GbE LAN, and an Aspeed AST2600 video controller.
Builders needing one processor, up to 256GB DDR5 ECC memory, and ten SATA ports for storage arrays will match this platform. It also offers two PCIe 5.0 x16 slots, three PCIe 5.0 x8 slots, two MCIO connectors for four NVMe SSDs, and two M.2 PCIe 5.0 x4 slots. Buyers requiring dual-socket support, more than 256GB memory, or 10GbE networking should consider other options.
The memory subsystem accepts DDR5-4800MHz or DDR5-5600MT/s 3DS ECC RDIMMs across eight slots, but the total installed capacity cannot exceed 256GB. This limit defines the maximum RAM configuration for any single-processor deployment on this board.
Measured against everything we stock in Server & Workstation Boards, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SUPERMICRO |
| Model name | X13SEI-F |
| Part number | MBD-X13SEI-F-O |
| Processor | |
| Processor | Intel Xeon |
| CPU socket | LGA 4677 |
| Supported CPU count | 1 |
| Memory | |
| RAM slots | 8 DIMM slots |
| Supported memory | Up to 2 TB 3DS ECC RDIMM, DDR5-4800 MHz |
| Max supported RAM | 256 GB |
| ECC support | Yes |
| Storage | |
| SATA ports | 10 x SATA 6.0Gb/s |
| Graphics | |
| Onboard video chip | Aspeed AST2600 |
| Connectivity | |
| Ethernet controller | Intel I210 |
| Second LAN controller | Intel I210 |
| Maximum network speed | 100 Mbit/s |
| Ports & slots | |
| USB 3.2 | 4 USB 3.2 Gen1 port(s) (2 rear; 1 type A; 1 via header) |
| Size & build | |
| Form factor | ATX |
| Width and length | 12 in × 10 in |
| Shipping weight | 1.72 kg |
| Package size | 460 × 373 × 84 mm |
The board fits any ATX chassis measuring at least 12" x 10"; choose a cooler rated for LGA 4677 with up to 350W TDP capacity and verify it clears the eight DIMM slots and two MCIO connectors.
After seating all eight modules, enter BIOS and enable the DDR5-4800 frequency profile; the board defaults to a lower speed until the profile is selected.
The Aspeed AST2600 BMC chip manages remote access; if IPMI becomes unresponsive, the chip or its dedicated firmware storage may need service.
More in Server & Workstation Boards
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?