XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2.5" SATA internal SSD with 480 GB of 3D NAND TLC, up to 530 MB/s read and 500 MB/s write, 1,097 TBW endurance and power-loss protection
The Synology SAT5210-480G is a 2.5-inch internal solid-state drive with a 480GB capacity and a SATA III interface. It uses 3D NAND TLC memory and delivers sequential reads up to 530 MBps and writes up to 500 MBps. Random 4K performance reaches 96,000 read IOPS and 55,000 write IOPS for consistent I/O handling.
This drive targets intensive mixed workloads such as online transaction processing databases and virtualization on compatible Synology systems. End-to-end data protection and a power loss protection circuit guard data integrity during unexpected outages. It is not intended for consumer laptops or desktops needing a basic boot drive.
The terabytes written figure of 1,097 TBW defines how much data can be written over the drive's warranted life. A 1.5 million hour MTBF and an operating range of 0°C to 70°C support continuous operation. Buyers with higher write-volume requirements should verify the TBW against their workload profile.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Synology |
| Model name | SAT5210-480G |
| Total capacity | 480 GB |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 530 MB/s |
| Sequential write speed | Up to 500 MB/s |
| Sustained random 4KB read | 96,000 IOPS |
| Sustained random 4KB write | 55,000 IOPS |
| Storage | |
| NAND flash type | 3D NAND TLC |
| Write endurance | 1,097 TB |
| Connectivity | |
| Connection protocol | SATA |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 1.3 W |
| Active power draw | 2.8 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Overall width | 69.85 mm |
| Product depth | 100 mm |
| Shipping weight | 0.10 kg |
| Package size | 152 × 114 × 8 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C (32 °F to 158 °F) |
| Storage temperature range | -40 °C to 85 °C (-40 °F to 185 °F) |
| More details | |
| Mean time between failures | 1.5 million hours |
In a typical system the drive sustains up to 530 MBps sequential reads and 500 MBps sequential writes, with 96,000 random read IOPS and 55,000 random write IOPS for mixed workloads.
The SATA III link caps throughput at roughly 600 MBps, so the drive’s 530 MBps read and 500 MBps write speeds sit near the interface ceiling without needing PCIe lanes.
Yes, the 7 mm z-height matches the common 2.5-inch bay spec, and the 69.85 mm width aligns with standard drive caddies for laptops and servers.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?