We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flat SATA cable with 90-degree right-angle and straight connectors, .5m

Takrabssin

Takrabssin SATA cable 90-degree right-angle 0.5m black

SKU CH-7W9B-PEDBZ

A 0.5 m SATA III cable with a 90-degree right-angle connector on one end and a straight connector on the other, supporting 6.0 Gbps data transfer

  • Connector count2
  • Connector details90 Degree Right to Straight
  • Product typeSATA III
  • Product colorBlack
  • Overall length1.64 ft/0.5m
  • DetailsSATA III with 90 Degree Right to Straight Connectors

Color Black

  • 90-degree right-angle connector prevents crimping in tight spaces
  • Metal latches on both ends secure connections to drives
  • SATA III specification compliant for up to 6.0 Gbps transfer
  • 5 m flat slim cable reduces clutter inside the case
  • 7-pin connectors at each end link HDDs, SSDs or optical drives

Takrabssin SATA III 0.5 m cable

This Takrabssin cable carries the SATA III specification for internal drive connections. The 0.5 m length suits short runs between a motherboard and a nearby drive bay. Builders working in compact chassis will find the reach adequate without excess slack. It serves any desktop or laptop HDD, SSD or optical drive that uses a standard SATA interface.

6.0 Gbps interface limit

The SATA III link tops out at 6.0 Gbps, so sustained throughput cannot exceed that ceiling. Mechanical hard drives rarely saturate the bus, yet modern SSDs often hit the bottleneck during large sequential transfers. The cable itself adds no protocol overhead beyond the spec. Users needing higher bandwidth must choose a different interface entirely.

90-degree right-angle latch connectors

One end carries a 90-degree right-angle plug while the other remains straight, letting the angled side hug the drive or board edge in tight bays. Metal latches on both 7-pin connectors lock the cable in place and resist accidental unplugging during transport or vibration. The flat, slim jacket reduces bulk and helps airflow around crowded SATA ports. The fixed right-angle orientation cannot be rotated to suit every port layout.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 80% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeSATA III
Product colorBlack
Ports & slots
Connector count2
Connector details90 Degree Right to Straight
Size & build
Overall length1.64 ft/0.5m

Other versions of this model

3 more in the same range

Questions about this item

Straight or right-angle — which end goes where?

One end is a 90-degree right-angle connector, the other is straight; choose the right-angle side for the drive in a tight bay and the straight side for the motherboard port.

Will the 6.0 Gbps rating actually move data that fast?

The cable supports SATA III at 6.0 Gbps; real throughput depends on the drive and controller, but the cable itself does not limit the link below that ceiling.

Does the metal latch work with standard 7-pin SATA ports?

Yes, both ends use 7-pin connectors with metal latches that lock into any standard SATA or eSATA port for a secure fit.

More in SATA & eSATA Drive Cables

Similar items