TAURKENAM 10M 22AWG 4pin LED Strip Extension Cable
A 10-metre, 22AWG four-pin cable extends power between RGB LED strips and controllers, supporting 5050 and 3528 models
- Extends RGB strips up to 10 metres with 22 AWG copper conductors
- Reaches power sources 33 feet away using flexible PVC-insulated cable
- Connects 4-pin 5050 and 3528 RGB strips without signal loss
- Cuts and solders easily for custom-length installations
- Bends and routes around corners while maintaining reliable conductivity
Extension Cable for 4-Pin RGB LED Strips
This 10 metre 22 AWG extension cable connects or extends 4-pin RGB LED strips such as 5050 and 3528 types. Multi-strand copper conductors are wrapped in upgraded PVC for high conductivity, low resistance and corrosion resistance. The flexible cord can be cut and welded to suit custom lengths. It bridges the gap between a power source and LED lighting.
Check Connector Type and Voltage Before Buying
Verify that your LED strip uses a standard 4-pin RGB connector compatible with this cable. Confirm the supply voltage matches your strip and controller specifications. Ensure the 22 AWG gauge is adequate for the current draw over the 10 metre run. Plan the routing so the flexible PVC jacket is not subjected to sharp bends or excessive heat.
Suits DIY Lighting Builds Needing Extra Reach
Ideal for hobbyists extending RGB strip lighting around corners, under cabinets or behind monitors where the stock cable falls short. The 33 foot length offers generous slack for large rooms or complex layouts. Not suitable for single-colour two-pin strips, high-voltage mains wiring or installations requiring armoured or outdoor-rated cable. Buyers needing waterproof or in-wall rated wire should look elsewhere.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $22.99
- Typical for this category: the median of 3,875 items is $23.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What comes in the box and what must I buy separately?
The package contains the 10 metre 22 AWG 4 pin extension cable; connectors, controllers or power supplies are not included and must be purchased separately.
Should I choose the 10 metre or 33 foot length for my RGB 5050 or 3528 strip?
Both figures describe the same cable; 10 metres equals approximately 33 feet, so select the single length option that matches your run distance.
How does the 22 AWG gauge affect voltage drop on a 10 metre run to my 5050 strip?
The 22 AWG multi copper core provides low resistance, limiting voltage drop over the 10 metre length for typical RGB 5050 or 3528 installations.
More in AC Adapters & Power Bricks
