TAURKENAM E26/E27 Light Socket Adapter 3 Outlet 10A 1250W 7 inch Cord Black 2 Pack
Converts an E26 or E27 bulb socket into three grounded AC outlets with a 7-inch cord, rated at 125 V, 10 A and 1250 W, and includes a built-in fuse for overload protection
- Add three outlets to any E26 or E27 lamp holder
- Accepts both two-prong and three-prong plugs without extra adapters
- 7-inch cord lets you orient the adapter in any direction
- Flame-retardant PVC housing resists heat and corrosion for long service
- Rated 125 V AC, 10 A, 1250 W with built-in fuse for overload protection
E26/E27 Socket Adapter Two Pack
This two-pack converts standard E26 or E27 light sockets into three grounded AC outlets. It suits homeowners and DIYers who need temporary power in garages, basements, workshops or covered outdoor areas without installing new wiring.
Three Prong Outlets Plus Extension Cord
Each adapter provides three prong sockets that accept both two and three prong plugs, removing the need for separate grounding adapters. A 7 inch cord lets you orient the outlets away from the fixture, and an internal fuse interrupts power if the 10 amp rating is exceeded.
Check Socket Type And Load Before Use
Verify the existing fixture uses an E26 or E27 base and is rated for 125 volt AC supply. Ensure the combined draw of connected devices stays below 1250 watts and avoid sustained high-current loads that could trip the fuse.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $30.99
- Pricier than about 63% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the built-in fuse need replacement after it trips, or does it reset automatically?
The adapter uses a one-time fuse that cuts power when current exceeds 10 A; once it blows the fuse must be replaced before the unit works again.
What is the maximum continuous load the three outlets can handle together?
The combined draw must stay at or below 10 A at 125 V AC, which equals 1250 W, or the fuse will open to prevent overheating.
How hot does the flame-retardant PVC housing get when the adapter runs at full 1250 W all day?
The housing is rated heat-resistant and erosion-resistant, but no specific surface-temperature figure is published for sustained maximum-load operation.
More in AC Adapters & Power Bricks
