TeKit 1 ft 16 AWG power extension cord with on/off switch
A 30 cm polarised extension cord with an inline on/off switch for 125 V devices
Color Black
Black$8.99
White$5.99
- Convenient on/off control without unplugging devices
- 1 ft length keeps setups tidy and compact
- Polarised 2-prong plugs ensure correct, safe orientation
- 16 AWG copper conductors rated 10 A at 125 V
- cUL certified for North American safety compliance
Desk-friendly power extension
The TeKit 1 ft cord adds a short reach and a built-in on/off switch for 2-prong polarised devices such as chargers, desk lamps and small power adapters. It plugs into a standard North American NEMA 1-15P outlet and accepts a matching NEMA 1-15R plug. The 30 cm length keeps cable clutter low on a bench or behind a UPS.
10 A continuous with 12 A switch headroom
The SPT-2 16 AWG copper conductors are rated for 10 A at 125 V, while the integrated switch carries a 12 A 125 V rating. This covers typical wall-wart loads and holiday-light strings. The cord reaches its limit with high-draw appliances such as heaters or large motors, so those should stay on a dedicated branch circuit.
Cool, quiet, no standby draw
Passive copper and PVC construction means no fan noise and no heat build-up under normal loads. Flipping the switch cuts power completely, eliminating vampire draw from attached adapters. The moulded plugs and jacketed cable meet CUL certification for safe everyday indoor use.
How it compares
Measured against everything we stock in AC Extension Cords, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 78% of the 864 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
3 more in the same range
TeKit White 1ft 2-Prong Polarized Power Extension Cord with Switch 16AWG 125V
Questions about this item
Will the 16 AWG cord and 12 A switch handle the same load as my existing 125 V power strip?
The cord is rated at 10 A and the built-in switch at 12 A, both at 125 V, so the strip’s rating must not exceed 10 A for continuous use.
How can I confirm the switch is operating correctly once installed?
Toggle the switch; the connected device should power on and off cleanly with no flickering, indicating the 12 A 125 V switch is functioning.
Does the package include anything besides the 1 ft black cord with the integrated switch?
Only the single 1 ft polarised NEMA 1-15P to NEMA 1-15R extension cord with the on/off switch is supplied; no extra adapters or hardware are included.
More in AC Extension Cords
Similar items
STARTECH PAC1011410 10 ft power extension cord 14 AWG
- Cable Connectors
- Black
CyberPower GC201 0.5 ft power extension cord 2 outlets 13A 125V
- Others
- Black
Cables To Go 53408 12 ft power extension cord
- Cable Connectors
- Black
TeKit AU to UK Power Extension Cord 1 ft 17AWG 13A 250V
- AU Australia 3 Pin…
- Cable Connectors
Tripp Lite P044-06I 6" NEMA L5-20R to 5-20P 12AWG power extension cord
- Cable Connectors
- Black
TeKit Schuko CEE 7/7 Male to Female Power Extension Cord 0.5m 10A 250V
- EU Europe Schuko Ma…
- Extension Cable








