We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TeKit

TeKit C20 to Dual C13 Y-Splitter Power Cord 12AWG 1ft

SKU CH-61TS-5Z35M

A 1ft C20 to dual C13 Y-splitter with 12AWG main wire and 14AWG splitter wires, rated 20A at 250V for server and PDU power distribution

  • Connector count3
  • Connector detailsC20 to dual C13 Splitter cord
  • Connector genderMale to Female
  • Product typeCable Splitters
  • Product colorBlack
  • Overall length1 ft (0.3 m)
  • One C20 inlet powers two C13 outlets for efficient rack distribution
  • 12AWG main cable rated 20A at 250V handles high-current server loads
  • 14AWG splitter legs rated 15A ensure safe delivery to each device
  • UL-listed construction meets safety standards for professional data-centre use
  • 1ft length keeps cable runs tidy inside dense rack enclosures

Dual C13 Splitter for Server PDUs

This Y-splitter power cord accepts a single C20 inlet and provides two C13 outlets, allowing two devices to share one power source. It is built for servers, PDUs, network switches and other rack-mounted equipment that use standard IEC C13 connections. The one-foot overall length keeps cable runs short and tidy inside dense rack environments. The black jacket maintains a professional appearance in data-centre installations.

Thermals Noise and Power Draw

The main cable uses 12AWG conductors rated for 20A at 250V, while each split leg steps down to 14AWG rated for 15A at 250V. UL listing confirms the assembly meets recognised safety standards for continuous operation. Passive construction means no fan noise or active cooling is introduced. Secure-fitting connectors maintain solid contact under normal rack vibration and thermal cycling.

20A C20 Inlet Rating Decides Fit

Your power source must provide a C20 socket capable of supplying up to 20A at 250V for the splitter to operate within its rated limits. Devices plugged into the C13 legs must not draw more than 15A each, and combined load must stay within the 20A main-cable rating. Buyers who need to power more than two devices from one C20 inlet cannot use this splitter.

How it compares

Measured against everything we stock in PC Power Cables, at today’s prices. Recalculated every night.

Price $19.99
Pricier than about 65% of the 1,029 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTEKIT
Product typeCable Splitters
Product colorBlack
Ports & slots
Connector count3
Connector detailsC20 to dual C13 Splitter cord
Connector genderMale to Female
Size & build
Overall length1 ft (0.3 m)

Other versions of this model

5 more in the same range

Questions about this item

How do I connect the C20 plug and the two C13 sockets, and which step do people often miss?

Plug the C20 male end into your PDU or server inlet, then insert both C13 female ends into the device power ports; the step often missed is seating each C13 connector fully until the latch clicks, otherwise the connection can loosen under vibration.

What maintenance or replacement will this Y-splitter need over time?

Inspect the 12AWG main cable and 14AWG split legs periodically for jacket wear, kinks or discoloured pins; replace the whole assembly if insulation cracks or the C13 latches no longer hold securely.

What limit appears first when the cord runs continuously at full load?

The 15A/250V rating on each 14AWG split leg is reached before the 20A/250V main 12AWG section, so sustained draw above 15A per C13 branch will hit the thermal limit first.

More in PC Power Cables

Similar items