We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black eSATAp cable with SATA 22pin and IDE 4pin connectors, 50cm

TeKit

TeKit eSATAp to SATA 22pin & IDE 4pin 5V 12V Cable 50cm/1.6ft

SKU CH-VGBQ-5CD3Z

Connects 2.5 or 3.5 SATA drives to an eSATAp port with integrated 5 V power and optional 12 V Molex for 3.5 units

  • Cable length1.64 ft (0.5m)
  • Connector count3
  • Connector detailseSATAp Power ESATA Combo to SATA 22pin & IDE 4pin 5 V 12 V f
  • Connector genderMale to Male
  • Conductor typeCopper Conductor
  • Product typeeSATAp Power ESATA Combo to SATA 22pin & IDE 4pin 5 V 12 V f
  • Connect 2.5" or 3.5" SATA drives externally via eSATAp port
  • Power 2.5" drives directly from the eSATAp port without extra supply
  • Run 3.5" drives by adding the included Molex power connector
  • Shielded copper conductors protect data integrity across the 0.5 m link
  • Male-to-male connectors join eSATAp to SATA 22-pin and IDE 4-pin interfaces

Connect 2.5" and 3.5" SATA drives externally

This cable adapts a single eSATAp port to a 22-pin SATA data and power connector plus a 4-pin Molex plug. It supports both 2.5-inch and 3.5-inch hard disks without an external enclosure. The 1.64 ft length suits desktop or bench use. Shielded copper conductors carry the signal.

Verify your host port supplies 5 V and 12 V

The host must provide a powered eSATAp port that delivers 5 V through the USB portion for 2.5-inch drives. For 3.5-inch drives the separate Molex connector must be attached to a 12 V supply. Do not connect the Molex plug when using a 2.5-inch drive. Confirm the port is labelled eSATAp before ordering.

Shielded copper holds signal quality over long

The foil shield and copper cores resist interference during sustained read or write sessions. Voltage drop across the 0.5 m run stays within SATA limits for mechanical drives. No active electronics are present, so thermal throttling does not occur. The passive design maintains consistent throughput until the drive itself reaches its own limits.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $17.99
Pricier than about 67% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTekit
Product typeeSATAp Power ESATA Combo to SATA 22pin & IDE 4pin 5 V 12 V for 3.5 in 2.5 in Hard Disk Data Cable
Product colorBlack
Ports & slots
Connector count3
Connector detailseSATAp Power ESATA Combo to SATA 22pin & IDE 4pin 5 V 12 V for 3.5 in 2.5 in Hard Disk Data Cable
Connector genderMale to Male
Size & build
Overall length1.64 ft (0.5 m)
Cable length1.64 ft (0.5m)
Cable shieldingYes
Conductor typeCopper Conductor

Questions about this item

Does the 50 cm cable include a separate Molex power connector for 3.5" drives?

Yes, the cable splits into a SATA 22pin data connector and a 4pin Molex connector; the Molex must be plugged into a power supply when using a 3.5" hard disk.

Which connector should I use for a 2.5" versus a 3.5" hard disk?

For a 2.5" drive connect only the eSATAp end and the SATA 22pin end; for a 3.5" drive also attach the 4pin Molex plug to a 12V power supply.

What does the eSATAp port actually supply to the drive?

The eSATAp port delivers 5V power through its integrated USB interface, enough for a 2.5" drive, while a 3.5" drive requires the additional 12V from the Molex connector.

More in SATA & eSATA Drive Cables

Similar items