TeKit IEC 320 C14 to Swiss 3-pin adapter

IEC 320 C14 to Swiss adapter

This adapter connects a C14 male plug from a UPS or PDU to a Swiss 3-pin female socket. It lets equipment with a standard IEC inlet draw power from a Swiss outlet without rewiring. The moulded PVC body is rated for 16 A at 250 V and uses H05VV-F3G 0.75 mm² conductors. It ships as a single black unit ready for immediate use.

Replacing fixed Swiss cords

Swap a hard-wired Swiss power lead for this short adapter when rack gear must stay on C14 inlets but the site only offers Swiss sockets. The change is worth it whenever a UPS or PDU with C14 outputs feeds Swiss-wired racks or when temporary Swiss power is needed for test benches. It avoids cutting cables or fitting permanent rewire kits.

Build integration

Plug the C14 end into any IEC 320 C14 outlet on a UPS, PDU or power strip, then insert the Swiss device plug into the female side. The short length keeps cable clutter low inside cabinets and leaves adjacent outlets free. No driver, configuration or additional hardware is required beyond a compatible C14 source and a Swiss 3-pin plug.