We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and blood-red Y-splitter cable with one 3-pin female and two 3-pin male connectors

TeKit

TeKit NTRACA0090 3-Pin Female to 2×3-Pin Male Power Splitter Cord 1 ft Black & Blood Red

SKU CH-JC2D-GBAY8

A 3-pin female to dual 3-pin male Y-splitter cable connects two case fans to one motherboard header, 1 ft long in black and blood red

  • Connector count3
  • Connector details3-Pin Female to 2 × 3-Pin Male Computer Case Fan Y-Splitter
  • Connector genderFemale to Male
  • Product type3-Pin Female to 2 × 3-Pin Male Computer Case Fan Y-Splitter
  • Product colorBlack & Blood Red
  • Overall length1 ft (0.3 m)
  • Splits one 3-pin fan header into two connectors
  • 1 ft length suits compact case routing
  • Black and Blood Red colour matches build themes
  • Female-to-male layout connects directly to motherboard header
  • Three connectors total for dual-fan power distribution

3-Pin Fan Y-Splitter Cable

This TeKit NTRACA0090 adapter converts a single 3-pin female header into two 3-pin male connectors. It lets you power two case fans from one motherboard or controller header. The cable is finished in black and blood red and measures one foot in length.

Practical limits of the 3-pin interface

A 3-pin connection supplies power and ground but carries only a tachometer signal back to the board. Both attached fans will run at the same voltage, so independent speed control is not possible. The motherboard reads a combined RPM signal that may not reflect either fan accurately. PWM control requires a 4-pin header and is not supported by this splitter.

Installation notes

Each connector is keyed to prevent reverse insertion, so alignment is straightforward. Route the short one-foot lead carefully to avoid tension on the header pins. A common issue is the motherboard reporting an averaged or erratic speed reading because it receives two tachometer signals on one pin.

How it compares

Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 95% of the 433 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTeKit
Model nameNTRACA0090
Product type3-Pin Female to 2 × 3-Pin Male Computer Case Fan Y-Splitter Power Connector Adapter
Product colorBlack & Blood Red
Ports & slots
Connector count3
Connector details3-Pin Female to 2 × 3-Pin Male Computer Case Fan Y-Splitter Power Connector Adapter
Connector genderFemale to Male
Size & build
Overall length1 ft (0.3 m)

Questions about this item

Should I choose this one-foot splitter or look for a longer version?

This model is only offered in a one-foot length, so choose it when the motherboard header or fan hub sits close to the two case fans; if you need more reach, a different cable is required.

What does the 3-pin layout mean once the splitter is installed in my PC?

Each 3-pin connector carries power, ground and a tachometer signal, so both fans will report speed to the motherboard while sharing the same voltage control.

How does the 3-pin interface limit fan control in practice?

Voltage regulation is the only control method available on 3-pin headers, so both fans will ramp together and cannot use PWM duty-cycle signals.

More in Y-Splitter Power Cables

Similar items