Kanto SUB8VMW 8-inch 300W Sealed Powered Subwoofer White home audio speaker
- Single
- 300 W Peak Power
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 14-piece in-ceiling speaker set with 6.5-inch woofers, 70-volt transformers offering five tap settings from 16 to 1 watt, and pressure-lock mounting for quick installation
This set contains fourteen flush-mount speakers designed for distributed audio in commercial, retail or residential ceilings. Each unit handles 70-volt lines with five tap settings from 16 down to 1 watt, or can be run in transformer bypass mode for standard amplifier connections. The two-way design uses a 6.5-inch poly mica woofer and a pivoting silk titanium dome tweeter.
The built-in transformer with 16, 8, 4, 2 and 1 watt taps replaces direct low-impedance wiring when you need long cable runs across multiple zones without signal loss. The jump is worth it when a single amplifier must drive many speakers across a large floor plan, because the 70-volt architecture keeps voltage drop manageable and lets you set individual zone levels at each speaker.
Spring-loaded clamps secure the 9.3125-inch frame into an 8.4375-inch cut-out with a 2.875-inch mounting depth, requiring no separate hardware. The raw wire terminals accept bare conductor for fast termination. Professional installation is recommended when using the 70-volt transformer taps, as incorrect tap selection or wiring polarity can unbalance the line and reduce output.
Measured against everything we stock in Home Speakers & Subwoofers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Theater Solutions by Goldwood |
| Model name | 7TSQ670 |
| Product type | In-Ceiling Speakers |
Each speaker fits a round cut-out of 8.4375 inches and needs a mounting depth of 2.875 inches behind the ceiling surface.
The clamps expand behind the drywall when the speaker is pushed up; the common error is not pressing firmly enough for all clamps to lock, leaving the unit loose.
Adjust the 16, 8, 4, 2 or 1 watt taps only if zone volume needs rebalancing; repaint the removable grilles any time the décor changes.
More in Home Speakers & Subwoofers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?