We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thinkstar USB 3.0 to SATA 22 pin 2.5 inch hard drive adapter Z09

Thinkstar

Thinkstar USB 3.0 to SATA 22 Pin 2.5 Inch Hard Drive Adapter Z09

SKU CH-Y1P7-1JR05

Connects a 2.5 inch SATA drive to a USB 3.0 port using a 22 pin cable

  • Connect any 2.5 inch SATA drive via USB 3.0
  • 22-pin connector supplies both data and power
  • Compact 55 g adapter fits in a laptop bag
  • Plug-and-play design needs no driver installation

USB 3.0 SATA adapter for 2.5 inch drives

This Thinkstar adapter connects a 2.5 inch SATA hard drive or SSD to a USB 3.0 port. The 22 pin connector carries both data and power through a single cable. It suits technicians and home users who need quick access to bare laptop drives without an enclosure.

Sustained transfer limited by SATA and USB 3.0

Under continuous load the link runs at the SATA device speed and the USB 3.0 bus ceiling. The small cable assembly has no active cooling so extended heavy I/O may warm the adapter. It is not intended for permanent server duty or RAID arrays that demand uninterrupted maximum throughput.

How it compares

Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 94% of the 1,721 comparable items (median $22.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Does the USB 3.0 port on the Z09 adapter deliver enough power to run a 2.5 inch SATA drive all day without an external supply?

The USB 3.0 connection provides both data and power for 2.5 inch SATA drives, so no separate power brick is needed for typical SSDs or hard disks.

What drive connector must the laptop or desktop already have for this adapter to work?

Your drive must use a standard 22 pin SATA interface; the adapter plugs directly into that connector and the host needs a free USB 3.0 Type-A port.

More in SATA, IDE & M.2 Drive Adapters

Similar items