Tripp Lite N201-010-WH Cat 6 network ethernet cable 10 ft White

Ready for Gigabit networks

This Cat 6 patch cable carries data, voice and video at up to 550 MHz. It meets EIA/TIA 568-B-2.1 draft 9 standards and is UL verified. High-quality copper conductors and a staggered-pin plug keep near-end crosstalk low. The ten-foot white cord fits Cat 6, Cat 5e and Cat 5 installations.

Snagless boot eases routing

Molded connectors and a snagless boot prevent the tabs from catching on other cables during pulls. Both ends terminate in RJ45 male plugs that click securely into standard ports. No tools or punch-down work are required; simply plug each end into a switch, router, patch panel or device. The only common issue is forcing a connector into a port that is already damaged or misaligned.

Consistent throughput on long runs

The 550 MHz rating supports sustained gigabit speeds across the full ten-foot length without the drop-offs seen on lower-category cords. Crosstalk suppression remains stable during continuous transfers, so large file moves and streaming sessions hold their rate. The cable is not designed for outdoor burial, PoE loads beyond the Cat 6 specification, or environments that require shielded or plenum-rated jackets.