We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft 12AWG power extension cord with C19 to C20 connectors

Tripp Lite

Tripp Lite P036-010 10 ft 12AWG C19 to C20 computer power extension cord

SKU CH-8P8S-19SGH MPN P036-010

A 10 ft 12AWG extension cord with IEC 60320 C19 to C20 connectors, rated 20 A at 250 V for server chassis power

  • Product typePower cord
  • Product colorBlack
  • Overall length10 ft (3.05 m)
  • Key featuresIEC-60320-C19 to IEC-60320-C20 12AWG x 3C, SJTW, 20A, 250 V

Length 10 ft.

  • 10 ft extension reaches distant PDUs
  • 12 AWG conductors handle 20 A loads
  • C19 to C20 fits blade-server inlets
  • SJTW jacket resists oil and moisture
  • RoHS approved for environmental compliance

Power cord for blade servers and high-draw equipment

This 10 ft extension cord connects an IEC 60320 C19 inlet to a C20 plug using 12AWG conductors rated for 20 A at 250 V. It suits rack-mounted servers, blade chassis and power distribution units that require a heavy-duty supply link. The SJTW jacket and RoHS approval meet typical data-centre safety and environmental requirements.

Replaces shorter or lighter factory leads

Standard C19 cables often ship at six feet or less and may use thinner wire that limits continuous current. This 10 ft length with 12AWG copper lets you route power from a floor PDU to upper rack units without daisy-chaining or voltage drop concerns. The upgrade is worth it when the existing cord cannot reach the outlet or is rated below the equipment’s 20 A draw.

Limited by C19/C20 connector ratings

The IEC 60320 C19 and C20 interface caps the assembly at 20 A and 250 V, so it cannot serve loads that exceed those values. The cord is a single 10 ft run with no field-adjustable length, and its SJTW construction is intended for indoor rack environments rather than outdoor or plenum spaces.

How it compares

Measured against everything we stock in PC & Server Extension Cords, at today’s prices. Recalculated every night.

Price $49.99
Pricier than about 91% of the 401 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTripp Lite
Model nameP036-010
Product typePower cord
Product colorBlack
Size & build
Overall length10 ft (3.05 m)
Shipping weight0.70 kg
Package size224 × 203 × 44 mm

Other versions of this model

1 more in the same range

Questions about this item

Does the C19 connector on this 12AWG cord fit a standard IEC 60320 C20 inlet on my server chassis?

Yes, the P036-010 terminates in an IEC 60320 C19 plug that mates directly with a C20 inlet rated for 20 A at 250 V.

What is the correct orientation when plugging the C19 end into a blade server power supply?

Align the keyed notch on the C19 connector with the tab on the C20 inlet; forcing it upside-down bends the pins and is the most common installation error.

When should I replace this 10 ft SJTW extension cord in a high-temperature rack environment?

Inspect the jacket annually for cracking or discolouration; replace immediately if the insulation shows heat damage or the connectors become loose.

More in PC & Server Extension Cords

Similar items