We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft DVI-D single link cable with male connectors at both ends

Tripp Lite

Tripp Lite P561-010 10 ft DVI-D Single Link Cable

SKU CH-JGP3-H4C7D MPN P561-010

A 10 ft DVI-D single link cable connects a monitor and computer at resolutions up to 1920 x 1200 with foil and braid shielding

  • Cable length10 ft (3.05 m)
  • Connector count2
  • Connector detailsConnector on First End: 1 x DVI-D Male Connector on Second E
  • Connector genderMale to Male
  • Product typeDVI-D to DVI-D
  • Product colorBlack
  • Digital video up to 1920 x 1200 resolution
  • 10 ft length suits typical desk-to-monitor runs
  • Foil and braid shielding blocks EMI and RFI
  • DVI-D male-to-male connectors fit single-link ports
  • Molded strain relief protects connectors during daily use

Digital DVI-D Single Link Cable

This 10 ft DVI-D male-to-male cable carries a digital TMDS signal between a graphics card and a monitor that both have single-link DVI ports. Foil and braid shielding protects the link from EMI and RFI interference. It supports resolutions up to 1920 x 1200 for flat-panel displays, digital CRT displays and projectors. The moulded connectors and black jacket are built for a permanent desk installation.

Suited for single-link DVI connections

It fits any system where the source and display each provide a single-link DVI-D port and the cable run is within ten feet. Builders who need a dual-link bandwidth for higher resolutions or who must span a longer distance should choose a different cable. Users with HDMI, DisplayPort or VGA-only equipment cannot use this cable without an active adapter. The product is a passive cable and does not convert signals.

Maximum resolution 1920 x 1200

The single-link specification limits the usable resolution to 1920 x 1200 at standard refresh rates. If the display or application requires a higher pixel count, this cable will not deliver the required bandwidth. Verify that both devices list single-link DVI-D support before purchasing. No other cable parameter overrides this resolution ceiling.

How it compares

Measured against everything we stock in DVI Monitor Cables, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 80% of the 54 comparable items (median $18.49).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTripp Lite
Model nameP561-010
Product typeDVI-D to DVI-D
Product colorBlack
Ports & slots
Connector count2
Connector detailsConnector on First End: 1 x DVI-D Male
Connector on Second End: 1 x DVI-D Male Video
Connector genderMale to Male
Size & build
Cable length10 ft (3.05 m)
Shipping weight0.25 kg
Package size197 × 152 × 23 mm

Questions about this item

What monitor and graphics card ports do I need to use this DVI-D male-to-male cable?

You need a monitor with a DVI input and a graphics card or CPU that provides a single-link DVI output; both must accept the male DVI-D connectors on this 10 ft cable.

Can I connect this single-link DVI-D cable to an older dual-link DVI port on my graphics card?

Yes, the single-link male DVI-D plugs fit into dual-link DVI receptacles; the link will simply operate at single-link speeds up to 1920 x 1200.

How can I verify the cable is delivering a proper digital signal after I plug it in?

The display should show a stable image at up to 1920 x 1200 resolution with no sparkles, drop-outs or colour errors, confirming the foil-and-braid shielded link is working.

More in DVI Monitor Cables

Similar items