ASRock Rack ROMED8-2T/BCM server motherboard SP3 LGA 4094 8 DDR4 3200 10GbE
- EPYC
- Supports AMD EPYC 7…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Dual Socket 604 Xeon server board with Intel E7505 chipset, four DDR DIMM slots, five PCI slots and AGP Pro in ATX form factor
The Tyan S2668AN is an ATX server motherboard built around the Intel E7505 chipset with dual Socket 604 slots for Xeon processors. It provides four 184-pin DIMM sockets for DDR SDRAM at 200 or 266 MHz and five 5 V PCI expansion slots alongside a single AGP Pro slot at 1.5 V. The board measures 12 in by 9.6 in and ships without accessories.
This board fits technicians who need a direct drop-in for an existing S2668AN in a validated chassis and power infrastructure. It does not suit builders starting a new deployment because onboard IDE and SATA connectors are absent and the AGP Pro slot limits modern graphics options. Buyers needing integrated storage interfaces or current-generation I/O should look elsewhere.
The defining specification is the pair of Socket 604 processor sockets driven by the Intel E7505 chipset with a 533 MHz maximum bus speed. This combination dictates which Xeon CPUs and DDR SDRAM modules the system can accept. Verify processor stepping and memory voltage requirements against your inventory before ordering.
Measured against everything we stock in Server & Workstation Boards, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Power on the system and confirm the BIOS POST completes, both Xeon processors are detected and the DDR SDRAM modules report at 266 MHz or 200 MHz bus clock.
Only the ATX board itself is included; IDE and SATA connectors are absent, so you must supply ATA-100 cables for the two 40-pin IDC headers, DDR SDRAM DIMMs for the four 184-pin slots and compatible Socket 604 Xeon CPUs.
Install PC2100 modules to run at the 266 MHz bus clock or PC1600 modules for the 200 MHz clock; both voltages are 2.5 V and the board has four 184-pin DIMM slots.
More in Server & Workstation Boards
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?