We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White square dish antenna with integrated radio, 12.46 inches wide and 6.68 inches deep, outdoor UV-stabilised enclosure

Ubiquiti Networks

Ubiquiti Networks LTU-Pro 5 GHz PtMP 24 dBi Integrated Dish Antenna access point

SKU CH-4KHH-1SBRN

A 5 GHz PtMP subscriber station with an integrated 24 dBi dish antenna, 10/20/30/40/50 MHz channel width flexibility and a 10/100/1000 Ethernet port

  • Long-range PtMP links via integrated 24 dBi dish antenna
  • Flexible 10/20/30/40/50 MHz channel widths adapt to spectrum
  • Independent TX/RX frequency selection avoids local interference
  • High-order 4096QAM modulation increases spectral efficiency
  • Gigabit Ethernet port supports full wired throughput

5 GHz PtMP subscriber station

The LTU-Pro is a 5 GHz Point-to-MultiPoint subscriber station that communicates with an LTU-Rocket base station. It uses proprietary LTU technology instead of standard 802.11 Wi-Fi, delivering an integrated 24 dBi dish antenna for long-range links. Outdoor UV-stabilised plastic housing in white protects the radio in exposed locations. A single 10/100/1000 Ethernet port provides the wired connection.

Passive thermal design with low power draw

The sealed plastic enclosure relies on passive cooling with no moving parts, so operation is silent. Power is supplied through the Ethernet port, keeping cabling simple for mast or pole mounting. Typical draw stays modest for a 24 dBi integrated radio, allowing deployment on standard PoE injectors or switches without special provisioning. The compact 12.46 by 12.46 by 6.68 inch form factor fits discreetly on customer premises.

Requires LTU-Rocket base station for PtMP operation

This unit functions only as a client in a Point-to-MultiPoint network and must pair with an LTU-Rocket base station; it cannot operate as a standalone access point or bridge. Channel width flexibility of 10, 20, 30, 40 or 50 MHz and independent TX/RX frequency selection help avoid local interference. Modulation up to 4096QAM maximises spectral efficiency on the licensed band. Buyers needing a base station or a point-to-point link should look elsewhere.

How it compares

Measured against everything we stock in Wi-Fi Access Points, at today’s prices. Recalculated every night.

Price $213.99
Cheaper than about 55% of the 782 comparable items (median $253.99).

Specifications

No published specifications for this item yet.

Questions about this item

How do I mount the LTU-Pro 24 dBi dish and align it to the LTU-Rocket base station?

Mount the 12.46"H x 12.46"W x 6.86"D UV-stabilized white enclosure on a pole or wall using the included bracket, then use the web UI signal meter to fine-tune azimuth and elevation until RSSI peaks; the step most often missed is locking both axes before tightening the final bolts.

What ongoing care does the LTU-Pro 5 GHz subscriber station require after installation?

Inspect the dish radome and Ethernet port seal annually for UV damage or water ingress, clean the radome with mild soap and water if debris builds up, and verify the 10/100/1000 Ethernet link speed remains at 1000 Mbps; no internal components are user-serviceable.

What is the first throughput limit I will hit on a sustained 50 MHz LTU link?

The integrated radio tops out at 4096QAM modulation, so spectral efficiency caps before the 1000 Mbps Ethernet port saturates; sustained throughput is therefore limited by the 50 MHz channel and proprietary LTU framing rather than the wired interface.

More in Wi-Fi Access Points

Similar items