Ring Chime Pro 2.4 5GHz 2000 sq ft surveillance accessory
- Extend your Wi-Fi t…
- Melody/Tune, Lighte…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Four 150-foot all-in-one cables carry video and DC power to HD analog cameras over pure copper with BNC male and 2.1 mm centre-positive plugs
This four-pack supplies 150ft all-in-one cables that carry both video and DC power to AHD, CVI, TVI, 960P and 720P security cameras. Each lead terminates in a BNC male video connector and a 2.1mm centre-positive power plug, so installers can run a single wire from the DVR to each camera without separate power runs. The pure-copper construction is intended for reliable signal transmission on standard closed-circuit television systems.
Cables arrive pre-terminated, so installation is a matter of pushing the BNC plugs onto the DVR and camera ports and seating the 2.1mm power plugs into the camera power inputs. Two RCA-to-BNC adapters are supplied in the box for any device that presents an RCA video jack instead of BNC. The only common snag is a camera that requires a different power-barrel size or polarity; the fixed 2.1mm centre-positive plug cannot be changed without cutting and re-terminating the cable.
Verify that every camera in the system accepts a 2.1mm centre-positive DC power connector and a BNC video input, or that you are prepared to use the supplied RCA adapters. Confirm the cameras operate on AHD, CVI, TVI, 960P, 720P or 960H/700TVL/1000TVL analog formats, because the cable is not designed for IP or pure-digital camera interfaces. Ensure the 150ft length matches the planned run from recorder to camera without excessive slack or tension.
Measured against everything we stock in Camera Mounts & Add-Ons, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | VideoSecu |
| Model name | CBHD1504 |
| Product type | Video & Power Cable |
| In the box | |
| In the box | 4x 150 ft Cable and Free BNC RCA Connectors |
Check the DVR or monitor for a stable 960P image with no rolling lines or snow; the pure copper conductors and BNC male connectors should deliver a clean HD analog signal up to the full 150ft length.
The box contains four 150ft all-in-one cables with BNC male video and 2.1mm center-positive power plugs, plus free BNC-to-RCA adapters; you only need a compatible DC power source for the cameras.
The same CBHD1504 cable supports both; it is rated for HD 960P/720P AHD, CVI, TVI and standard 960H 700TVL/1000TVL cameras, so one version covers all listed resolutions.
More in Camera Mounts & Add-Ons
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?