We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight black BNC video power cables coiled together, 150ft each with 2.1mm plugs

VideoSecu

VideoSecu CBV1508-A1 8-pack BNC video power cable 150ft

SKU CH-R7P6-NTNYA

Pre-terminated 150ft BNC video and 2.1mm power cable eight-pack simplifies CCTV installs

  • Product typeVideo & Power Cable
  • Details•150 ft video and power cable •For camera with DC power only
  • Key features•Used with Closed Circuit Television (CCTV) applications and
  • In the box8x 150 ft Cable and Free BNC RCA adapters
  • Simplify installation with pre-terminated 150ft video and power cable
  • Plug-and-play ready for DC-powered CCTV cameras only
  • BNC male video connector fits standard surveillance equipment
  • 1mm center-positive power plug delivers reliable power supply
  • Eight-cable pack with free BNC-RCA adapters expands system coverage

8-pack 150ft BNC video power cable

This VideoSecu CBV1508-A1 kit supplies eight pre-terminated 150ft cables that carry both video and DC power in a single run. Each cable ends in a BNC male connector for video and a 2.1mm centre-positive plug for power. The bundle is aimed at installers wiring multiple analogue CCTV cameras to a DVR or monitor.

Replaces separate video and power runs

Combining signal and supply into one jacket removes the need to pull two cables per camera, cutting labour and conduit fill. The upgrade is worthwhile when cameras accept only DC power and the existing infrastructure uses BNC terminations. These cables will not support SDI or HD cameras, so they cannot replace coaxial runs for higher-resolution formats.

Check camera power and connector type before

Verify that every camera in the system operates on DC power and uses a 2.1mm centre-positive jack. Confirm the recorder or monitor provides BNC female inputs for video. The included BNC-to-RCA adapters allow connection to composite inputs, but the cable itself is limited to standard CCTV applications.

How it compares

Measured against everything we stock in Camera Mounts & Add-Ons, at today’s prices. Recalculated every night.

Price $63.99
Pricier than about 74% of the 1,144 comparable items (median $24.99).

Specifications

Product
Brand nameVideoSecu
Model nameCBV1508-A1
Product typeVideo & Power Cable
In the box
In the box8x 150 ft Cable and Free BNC RCA adapters

Questions about this item

What length and connectors does each cable in the 8-pack have?

Each of the eight cables is 150ft long and comes pre-terminated with a BNC male video connector and a 2.1mm centre-positive power plug.

How do I install the cables, and what common mistake should I avoid?

Run the single combined cable from the camera to the DVR and power supply, then connect the BNC male to the video input and the 2.1mm plug to the camera's DC socket; the mistake is trying to use them with SDI or HD cameras, which the cable does not support.

What parts might need replacement over time?

The included BNC-to-RCA adapters can wear out with repeated mating cycles, so keep spares for future connector changes.

More in Camera Mounts & Add-Ons

Similar items