We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 180-degree 12VHPWR 16-pin adapter with four 8-pin PCIe connectors

Vszerda

Vszerda 12VHPWR 16 Pin to 4X 8 Pin 600W GPU Power Connector PCIe 5.0 ATX 3.0 180 Degree Adapter Type A

SKU CH-M25M-AAFSA

Converts four 8-pin PCIe connectors to a 12VHPWR 16-pin plug delivering 600W with a 180-degree angle for tidy routing

  • Delivers up to 600W for high-performance GPUs via 4x 8-pin to 12VHPWR 16-pin conversion
  • 180-degree angle design eases cable routing and reduces strain on GPU power connectors
  • PCIe 5.0 and ATX 3.0 compatible for modern RTX 4090, 4080, 3090Ti graphics cards
  • Type A orientation with 4 pins facing inwards fits MSI Gaming X Trio and NVIDIA FE backplate-side layouts
  • Also compatible with AORUS Master and Xtreme Waterforce models on the backplate side

12VHPWR 16-pin adapter for RTX 40-series GPUs

This 180-degree Type A adapter converts four 8-pin PCIe cables into a single 12VHPWR 16-pin connector. It is built for RTX 4090, 4080 and 4070 Ti graphics cards that place the socket on the backplate side. The right-angle shape keeps cables close to the card and eases routing in tight cases.

PCIe 5.0 ATX 3.0 power delivery limit

The connector is rated for 600 W through the 12VHPWR interface defined by PCIe 5.0 and ATX 3.0. Four separate 8-pin leads from the power supply are required to reach that ceiling. The 16-pin plug must be fully seated; partial insertion can cause overheating and damage.

Backplate clearance decides fit

Compatibility depends on how far the GPU backplate extends past the power socket. If the overhang exceeds 3 mm the Type A orientation will not seat correctly. Buyers whose cards have a larger backplate protrusion need a different adapter style.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $15.99
Typical for this category: the median of 7,839 items is $14.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick Type A or another style for my RTX 4090?

This adapter is Type A, meaning the four sense pins face inwards. It fits MSI Gaming X Trio, NVIDIA Founders Edition and AORUS Master cards on the backplate side, provided the backplate does not extend more than 3 mm past the power socket.

What does the 600 W rating mean when the cable is installed in my system?

The 600 W figure is the maximum power the 12VHPWR 16-pin connector can deliver when all four 8-pin PCIe plugs are fully seated and the 16-pin end is completely inserted into the GPU socket.

How does the PCIe 5.0 ATX 3.0 label affect what I can actually plug in?

The adapter follows the PCIe 5.0 and ATX 3.0 specifications for the 12VHPWR 16-pin interface, so it supports the 600 W power limit defined by those standards when used with a compliant power supply and graphics card.

More in Internal PSU & Riser Cables

Similar items